Product Details

Product Description

Certification:CE/ROHS

Welcome to use ES-B04 Sensor LED Bulb!

The product is an energy-saving sensor LED bulb, which adopts integrated circuit and precise detecting components. It can be on when one comes and be off automatically after one leaves. Its performance is stable. It can identify day and night.

SPECIFICATION

MODEL	ES-B04
COLOR	White
DETECTION RANGE	<6m(22~24℃)
DETECTION ANGLE	360°
POWER SOURCE	110V-130V/AC 220-240V/AC
RATED LOAD	LED 6W MAX.
TIME SETTING	60Sec
Power Frequency	50/60Hz
Ambient light	<10Lux~2000 Lux (adjustable)
Production Size	D61×125mm

FUNCTION

Ø Can identify day and night: The original setting in LUX is less than 20LUX. It only works in this environment (<20lux), such as dusk or evening .In daylight, it will stop working.
Ø Timedelay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic.(setting time is 60sec)

INSTALLATION

Ø Switch off the power;
Ø Connect the sensor lamp with E27 lamp holder.
Ø Switch on the power to test and use

TEST

Ø Before the testing, make sure the working ambient is less than 20LUX
Ø When you switch on the power, the sensor lamp doesn’t work at once. It needs to preheat 30 seconds. When the lamp gets the induction signal, it will be turned on. After the lamp is turned off, it will be turned on again when the sensor gets induction signal within 5~15 sec.
Ø After the first induction, the lamp will make sense again 5~10sec later. The load should work. When there is no induction signals in the sensor, the lamp stops working;

Note: when testing in daylight (more than 20LUX), the sensor lamp will not work!