Specifications
1.Detection Range:360
2.Power Source:110-240V/AC
3.Rated Load:6W
4.Detection Distance:6m
5.Time Delay:120sec
Welcome to read ES-B04 led light bulb motion sensor!
The product is an energy-saving sensor LED bulb, which adopts integrated circuit and precise detecting components. It can be on when one comes and be off automatically after one leaves. Its performance is stable. It can identify day and night.
SPECIFICATION
Power Source: 110V/AC-240V/AC Detection Range: 360°
Power Frequency: 50/60Hz Ambient Light: <20LUX
Working Temperature: -20~+40°C Time-Delay: 120sec
Installation Height: 2m-3.5m Rated Load: 6W
Detection Distance: 6m (max) Total luminance: 500lm
Model: | ES-B04 |
|
Power Source: | 110V-240V/AC |
Power Frequency: | 50/60HZ |
Detection Range: | <6m(max) |
Detection Angle: | 360° |
Production size | Φ61.5*121mm |
Rated Load: | LED 6WMax |
Time-Delay: | 120sec |
Ambient Light: | <20Lux |
Working Humidity: | <93%RH |
Installation Height: | 1.5m-4m |
FUNCTION
- Can identify day and night: The original setting in LUX is less than 20LUX. It only works in this environment (<20lux), such as dusk or evening .In daylight, it will stop working.
- Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic.(setting time is 60sec)
INSTALLATION
- Switch off the power;
- Connect the sensor lamp with E27 lamp holder.
TEST
- Before the testing, make sure the working ambient is less than 20LUX
- When you switch on the power, the sensor lamp doesn’t work at once. It needs to preheat 30 seconds. When the lamp gets the induction signal, it will be turned on. After the lamp is turned off, it will be turned on again when the sensor gets induction signal within 5~15 sec.
- After the first induction, the lamp will make sense again 5~10sec later. The load should work. When there is no induction signals in the sensor, the lamp stops working;
Note: when testing in daylight (more than 20LUX), the sensor lamp will not work!
Company Information
Factory is located in Ninghai County Ningbo City Zhejiang Province China.
Ofiice
Sample Room