Product Details

Detection Range: 360° Power Source: 110-240V/AC

Power Frequency: 50/60Hz Rated Load: <60W

Detection Distance: 6m max(<24℃) Time-Delay: min. 10sec±3sec

max. 120sec±10sec

Ambient Light: 3-2000LUX (adjustable) Installation Height: 2m-3.5m

Welcome to read ES-B03B lamp holder with sensor !

The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.

Specification:

Model:	ES-B03B
Power Source:	110V-130V/AC 220-240V/AC
Power Frequency:	50/60HZ
Detection Range:	6M MAX
Detection Angle:	360°
Rated Load:	E27 60W Max
Time-Delay:	10Sec~2Min(adjustable)
Ambient Light:	<3lux~2000lux(adjustable)
Working Humidity:	<93%RH
Installation Height:	2m-3.8m

Installation:

Ø Fix the holder in the place where you will want to install according to right figure.
Ø After installation of the sensor, connect with lamp, then you could test it.

Test:

Ø After installation, Turned LUX knob clockwise to the maximum (SUN). Turned time knob anti-clockwise to the minimum(-).
Ø Turn on the power, the sensor will be electrify and warm-up, 30 sec later, the item will be entered into working estate. 5~10 seconds after the light goes out for the first time and then sensing, the load should be worked.
Ø Turns LUX knob anti-clockwise to the minimum. If it is tested under the circumstance below 3LUX, load should not work after induction load stop working; but if you cover the detection window with opaque objects (towel etc), the load works. Under the condition of no induction signals, the load should stop working within 5-15 sec.

Detail Picture of ES-B03B lamp holder with sensor !

Welcome your any enquiry.

Skype ID: lena_lz / QQ ID:2837940943 / Facebook: ZI Lin