Product Details

Product Description

Welcome to use ES-B03B Infrared motion sensor lamp holder!

The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.

SPECIFICATION

MODEL	ES-B03
COLOR	White
DETECTION RANGE	<7m(22~24℃)
DETECTION ANGLE	360°
POWER SOURCE	110V-130V/AC 220-240V/AC
RATED LOAD	E27 60W MAX.
TIME SETTING	10Sec~5Min(adjustable)
Power Frequency	50/60Hz
Ambient light	<10Lux~2000 Lux (adjustable)
Production Size	D56*118mm

INSTALLATION

Ø Fix the holder in the place where you will want to install according to right figure.
Ø After installation of the sensor, connect with lamp, then you could test it.

TEST

Ø After installation, Turned LUX knob clockwise to the maximum (SUN). Turned time knob anti-clockwise to the minimum(-).
Ø Turn on the power, the sensor will be electrify and warm-up, 30 sec later, the item will be entered into working estate. 5~10 seconds after the light goes out for the first time and then sensing, the load should be worked.
Ø Turns LUX knob anti-clockwise to the minimum. If it is tested under the circumstance below 3LUX, load should not work after induction load stop working; but if you cover the detection window with opaque objects (towel etc), the load works. Under the condition of no induction signals, the load should stop working within 5-15 sec.

Note: when testing in daylight, please turn LUX knob to

(SUN) position, otherwise the sensor lamp could not work!