Specifications

.Support logic analyzer and oscilloscope
.1GSa/s sampling rate and 50GSa/s equivalent
sampling rate
.1024k recording length

DQ1102D - Digital Storage Oscilloscope / Mixed Signal Oscilloscope

 

Features:

.Support logic analyzer and oscilloscope
.1GSa/s sampling rate and 50GSa/s equivalent sampling rate
.1024k recording length
.7″wide screen 64k color TFT display
.USB-host for save and update

 

 

Technical Data	DQ1062D	DQ1102D	DQ1202D
Channels	2 channels oscilloscope+ 16 channels logical analyser
Sampling rate	1GSa/s
Equivalent sampling rate	25GSa/s
Display
Type	7″wide screen 64k color TFT LCD
Display contrast	Adjustable (16 gears) with the progress bar
Display resolution	800 horizontal × 480 vertical pixels
Vertical system
Sensitivity and accuracy	2mV/div~5V/div
Vertical resolution	8 bit
Width of band (-3dB)	DC (AC 10Hz) ~ 60MHz	DC (AC 10Hz) ~ 100MHz	DC (AC 10Hz) ~ 200MHz
Selectable analog bandwidth limit	20MHz
Rise time	≤5.8ns	≤3.5ns	≤1.8ns
DC gain Accuracy	±4%(2mV/div~5mV/div) ±3%(10mV/div~5V/div)
DC measurement accuracy	±(3%Rdg.+0.1div+1mV)(10mV/div~5V) ±(3%(Rdg.+vertical position)+0.2div+1%(vertical position) (2mV/div~200mV/div, +2mV; 200mV/div~5V/div, +50mV)
Horizontal system
SEC/DIV range	2ns~40s/div, at 2-4-8 increment
Waveform interpolation	Sin(x)/x
Recording length	1024k
Sampling rate and delay time accuracy	±50ppm (any time interval 1ms)
Delta time measurement accuracy	Single: ±(1 sampling time interval + 100ppm×Rdg. + 0.6ns)
	Average values: ± (1 sampling time interval + 100ppm×Rdg. + 0.4ns)
Trigger system
Mode	Auto, normal, single
Type	Edge, pulse, video, alternate
Hold off range	100ns~10s
Math	+, -, x, ÷
	FFT
Acquire input
Input coupling	DC, GND, AC
Input impedance	1MΩ ±2% 20pF±3pF
Probe attenuation	1x, 10x, 100x, 1000x
Max. input voltage	300V (DC+AC peak)
Measurement
Cursor	Voltage difference ( V) between cursors Time difference ( T) between cursors Reciprocal of T in Hz (1/ T)
Auto-measure	Vrms, Vavg, Vp-p, Vmax, Vmin, Vtop, Vhigh, Vlow, Vmid, Vamp; Period, Freq, Rise, Fall, +Width, -Width, +Duty, -Duty, Delay
I/O
Standard	USB(D), USB(H)
Options	LAN
Calibrator
Output voltage	5V≥( 1MΩ load)
Output frequency	1kHz
Logical analyzer
Input channel	D0~D15
Max. input impedance	200k (C=10P)
Max. sampling rate	500MHz
Recording length	512k
Max. input voltage	±60V
Minimum voltage slew	1.2Vpp
Logic threshold range	±8V
Compatible input	TTL, CMOS, ECL
Cursors	Voltage difference (ΔV) between cursors Time difference (ΔT) between cursors Reciprocal of ΔT in Hz (1/ΔT)
Measurement	Period and Frequency
Record postion	RefA, RefB
Trigger mode	Edge	D0~D15 select slope (rising or falling edge)
	Pulse width	D0~D15 select pulse polarity (positive or negative pulse), trigger when (=, ≠, >,
	Code-type	D0~D15 select code-type (H, L, X)
	Duration	D0~D15 select persist time and trigger when (data terminate, data start, and data delay)
	Queue	D0~D15 select specific data index (0~3) and code-type (H, L, X)
	Repeat	D0~D15 select code-type (H, L, X) and repeat times
Power source	100~120VACrms (±10%), 45~440Hz; 30VA Max; CAT Ⅱ 120~240VACrms(±10%), 45~66Hz; 30VA Max; CAT Ⅱ
Dimensions (Wx Hx D)	315×142×110mm
Weight	2.1kg
Accessories	Operation manual, power cord, USB cable, probe×2, sofrware CD-ROM, logic analyzer probe