DQ1062D - oscilloscope (with logic analyzer function)
Negotiable /Piece
Min.Order:2 Pieces
DQ1062D - Digital Storage Oscilloscope / Mixed Signal Oscilloscope
Features:
.Support logic analyzer and oscilloscope
.1GSa/s sampling rate and 50GSa/s equivalent sampling rate
.1024k recording length
.7″wide screen 64k color TFT display
.USB-host for save and update
|
| DQ1042C | DQ1062C | DQ1102C | DQ1152C | DQ1202C | |
Channels | 2 external + logical analyzer + multimeter | ||||||
Sampling rate | 2GSa/s | ||||||
Equivalent sampling rate | 50GSa/s | ||||||
Display | Type | 5.7 rectangle color LCD | |||||
Backlight intensity | 300 nit | ||||||
Display resolution | 320 horizontal × 240 vertical pixels | ||||||
Vertical system | Sensitivity and accuracy | 1mV/div~10V/div | |||||
Vertical resolution | 8 bit | ||||||
Width of band (-3dB) | DC (AC 5Hz) ~ 40MHz | DC (AC 5Hz) ~ 60MHz | DC (AC 5Hz) ~ 100MHz | DC (AC 5Hz) ~ 150MHz | DC (AC 5Hz) ~ 200MHz | ||
Selectable analog bandwidth limit | 20MHz | ||||||
Rise time | ≤8.7ns | ≤5.8ns | ≤3.5ns | ≤2.3ns | ≤1.8ns | ||
DC gain Accuracy | ±5%(1mV/div) ±4%(2mV/div) ±3%(5mV/div~10V/div) | ||||||
DC measurement accuracy | ±(5%+0.1div)( 1mV/div) ±(4%+0.1div)(2mV/div) ±(3%+0.1div)(5mV/div~10V/div) | ||||||
Horizontal system | SEC/DIV range | 2ns~50s/div(200MHz, 150MHz) 5ns~50ns/div(100MHz~40MHz), at 1-2-5 increment | |||||
Waveform interpolation | Sin(x)/x | ||||||
Recording length | 1024k | ||||||
Sampling rate and delay time accuracy | ±50ppm (any time interval ≥1ms) | ||||||
Delta time measurement accuracy | Single: ±(1 sampling time interval + 50ppm×rdg. + 0.6ns) Average values: ± (1 sampling time interval + 50ppm×rdg. + 0.4ns) | ||||||
Trigger system | Mode | Auto, normal, single | |||||
type | Edge, pulse, video, alternate | ||||||
Hold off range | 100ns~1.5s | ||||||
Math |
| +, -, ×, ÷ | |||||
| FFT | ||||||
Acquire input | Input coupling | DC, GND, AC | |||||
Input impedance | 1MΩ ±1.5% 24pF±3pF | ||||||
Probe attenuation | 1×, 10×, 100×, 1000× | ||||||
Max. input voltage | 400V (DC+AC peak) | ||||||
Measurement | Cursor | Voltage difference (V) between cursors Time difference (T) between cursors Reciprocal of T in Hz (1/T) | |||||
Auto-measure | Vrms, Vavg, Vp-p, Vmax, Vmin, Vtop, Vhigh, Vlow, Vmid, Vamp; Period, Freq, Rise, Fall, +Width, -Width, +Duty, -Duty, Delay | ||||||
I/O | Standard | USB(D), USB(H) | |||||
Options | GPIB, LAN | ||||||
Calibrator | Output voltage | 3V (≥1MΩ load) | |||||
Output frequency | 1kHz | ||||||
Logical analyzer | Input channel | 200MSa/s | |||||
Max. sampling rate | D0~D15 | ||||||
Recording length | 512k | ||||||
Max. input voltage | ±40Vpeak | ||||||
Minimum voltage slew | 1.2Vpp | ||||||
Trigger mode | Code | D0~D15, Trigger code: H, L, X Clock edge: Rise, Fall | |||||
persist | D0~D15, Trigger code: H, L, X | ||||||
Condition: >, <, = | |||||||
Persist setup: 20ns~10s | |||||||
Digital multimeter characterists | DC voltage | Range: 400.0mV/4.000V/40.00V/400.0V Accuracy: ± (1%+5digits) | |||||
AC voltage (40Hz~400Hz) | Range: 400.0mV/4.000V/40.00V/400.0V Accuracy: ± (1.2%+5digits) | ||||||
Resistance | Range: 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ Accuracy: ± (1.5%+5digits) | ||||||
On/off | <70.0Ω | ||||||
Diode | Forward voltage drop 0.5~0.8V | ||||||
DC current | Range: 4mA/40mA/400mA accuracy: ± (1%+5digits) Range: 4A accuracy: ± (1.5%+5digits) | ||||||
Power source |
| 100~240VACrms, 45~440Hz; 50VA Max; CAT | |||||
Dimensions (W×H×D) |
| 320×150×130 | |||||
Weight |
| 2.5kg | |||||
Accessories |
| Operation manual, adapter, probe×2, multimeter pen×2, current-voltage convertor module×2, |