Specifications

Digital storage oscilloscope
250MSa/s~1GSa/s sampling rate
7 inch colour LCD
one key print scrren
FFT function

DQ6000 - DIGITAL STORAGE OSCILLOSCOPE 

Features
. 500MSa/s~1GSa/s sampling rate
. 7 inch wide rectangle colour LCD
. One key print screen
. 2 x 512k words per channel record length
. FFT function
. Auto-setting for quick setup and waveform acquisition
. Advanced cursor modes: manual, auto and track 

 

TechnicalData	DQ6025	DQ6052	DQ6052E	DQ6102E
Display
Type	7" rectangle color LCD
Backlight intensity	300cd/m2
Display resolution	400 horizontal × 240 vertical pixels
Display contrast	Adjustable
VERTICAL SYSTEM
Sensitivity and accuracy	1mV / DIV~20V / DIV
Vertical resolution	8 bit
Width of band (-3dB)	25MHz	50MHz	50MHz	100MHz
Rise time	≤14ns	≤7ns	≤7ns	≤3.5ns
Sing-shot band width	25MHz	50MHz	50MHz	100MHz
Input coupling	DC , GND , AC
DC gain accuracy	±5% (1mV/DIV~2mV/DIV), ±4% (5mV/DIV) ±3% (10mV/DIV~20mV/DIV)
Delta voltage Measurement accuracy	±(3%Rdg+0.05DIV)
HORIZONTAL SYSTEM
SEC/DIV range	10ns~50s/DIV	5ns~50s/DIV	2ns~50s/DIV	2ns~50s/DIV
Sampling rate range	500M Sa/s	500M Sa/s	1G Sa/s	1G Sa/s
Wave forn interplation	(Sinx)/x
Record length	2 x 512k/channel
Memory length	25k (12.5k per channel)
Sampling rate and delay Time accuracy	±100ppm over any ≥1mS time interval
Delta time Measurement accuracy	Single ± (1 sampling interval time+ 100ppm x rdg +0.6ns) Average ± (1 sampling interval time+ 50ppm x rdg +0.4ns)
TRIGGER SYSTEM
Acquisition Mode	AUTO, Normal, Single
Type	Edge,TV, pulse, Width
Hold Off Range	80ns~1.5s
MATH	+, -, ×, ÷
	FFT
ACQUIRE INPUT
Input couping	DC,AC or GND
Input impedance	1MΩ±2% 20pF±3pF
Probe attenuation	1x,10x,100x,1000x
Max.input voltage	400V (DC + AC peak) at 1KHz or less
Channel CMR	Better than 40:1
Channel isolation	Better than 40:1
DISPLAY
Persist time	1s, 2s, 5s
STORAGE	Waveform, Setup, Bit
RECORDER	Record, Replay
MEASUREMENT
Cursor	Voltage differenceΔ(V) between cursors
	Time difference(ΔT) between cursors
	Reciprocal of ΔT in Hz (1/ΔT)
AUTO-Mesure	Vrms, Vavg, Vp-p, Vmax, Vmin, Vtop, Vhigh, Vlow, Vmid, Vamp; period, Freq, Rise, Fall, +Width, +Duty, -Duty, Delay
I/O
Standard	USB OTG
CALIBRATOR SIGNAL
Output Voltage	3V (≥1MΩ load)
Output Frequency	1 kHz
POWER SOURCE	100/240VACrms, 45Hz~440Hz, 50VaMax; CAT II
ACCESSORIES	One operation manual,Power cord, USB cable, probe2, Software CD-ROM
DIMENSIONS & WEIGHT	306(W) x 147(H) x 122(D)mm, 2.2kg