Specifications

240*128 dot-matrix graphics LCD display with back-light
10 test parameters
RS232C and HAND
LCR meter

BR5818A - LCR meter

 

Features:

Programmable signal frequency from 20Hz to 300kHz with 0.01Hz by step

Programmable signal voltage level from 10mVrms to 2.0Vrms with 0.01V by step

10 test parameters

240×128 dot-matrix graphics LCD display with back-light

10 bins comparator and bin counter

RS232C and HANDLE interfaces

Technical Data

Test parameters:                        L, C, R, |Z|, D, Q, X, B, G, θ

Accuracy:                                  0.05%

Test frequency:                          20Hz~300kHz

Frequency resolution:                 0.01Hz

Test level:                                  0.01Vrms~2.00Vrms

Level resolution:                         0.01V

Output impedance:                    30Ω or 100Ω

Measurement range:                  |Z|, R, X             0.00001Ω~99.9999MΩ

                                                C                      0.00001pF~999.999mF

                                                L                      0.00001μH~9.99999kH

                                                G, B                 0.00001μs~999.999s

                                                D                      0.00001~9.99999

                                                θ_(DEG)               -179.999°~179.999°

                                                θ_(RAD)              -3.14159~3.14159

                                                 %                   -999.999%~999.999%

Measurement speed:                 slow: 650ms       medium: 90ms       fast: 32ms

Equivalent circuit:                      series/parallel

Ranging mode:                          auto/hold

Trigger mode:                            internal/external, manual and bus

Averaging rate:                          1~255

Correction functions:                  open/short and load corrections

Measurement terminals:             five terminals

Display mode:                           direct, ABS, %, V/I (V/I monitor), bin number and bin counter

Display digits:                           primary display: 6 digits, secondary display: 5 digits

Comparator functions:                BIN1 to BIN9 and BIN out, 10 bins

Interface:                                   RS232C, HANDLER

Display:                                     240×128 lattices liquid crystal display

Power supply:                     110~127VAC±10%/220~240VAC±10%, 50Hz±2Hz/60Hz±2Hz

Dimensions (W×H×D):             320mm×140mm×400mm

Weight:                                    4.5kg