Product Details

Specifications

12v 9v dc converter
1.CE RoHS,ISO9001 approve
2.High reliable and efficiency
3.Compact size
4.Good price and quality

12v 9v dc converter

Professional Manufacturer 2 Year Warranty 50W 12V 9V DC Converter

60W Single Output DC-DC Converter SD-60 series

Features :

2:1 wide input range

Protections: Short circuit / Overload / Over voltage

1500VAC I/O isolation

Built-in EMI filter, low ripple noise

100% full load burn-in test

Fixed switching frequency at 83KHz

Low cost

High reliability

2 year warranty

SPECIFICATION
OUTPUT
Model	SD-60-5			SD-60-12			SD-60-24
DC Voltage	5V			12V			24V
Rated Current	12A			5A			2.5A
Current Range	0~12A			0~5A			0~2.5A
Rated Power	60W			60W			60W
Ripple & Noise	100mVp-p			120mVp-p			150mVp-p
Voltage Adj. Range	4.5~5.5VDC			11~16VDC			23~30VDC
Voltage Tolerance	±2.0%			±1.0%			±1.0%
Line Regulation	±0.5%			±0.3%			±0.2%
Load Regulation	±0.5%			±0.3%			±0.2%
Setup, Rise, Hold Up Time	2.5s,50ms,------at full load

INPUT
Voltage Range	48VAC
Efficiency	70%	73%	76%	72%	75%	78%	74%	80%	83%
AC Current	7A/12V			3A/24V			1.5A/48V

PROTECTION
Over Load	105~150% rated output power
	Protection type: Hiccup mode,recovers automatically after fault condition is removed
Over Voltage	5.75~6.75V/10%load			16.8~20V/10%load			31.5~37.5V/10%load
	Protection type: Hiccup mode,recovers automatically after fault condition is removed

ENVIRONMENT
Working Temp.	-10~+60℃ (Refer to "Derating Curve")
Working Humidity	20~90% RH non-condensing
Storage temp., Humidity	-20~+85℃ ,10~95%RH
Temp. Coefficient	±0.03%/℃ (0~50℃)
Vibration	10~500Hz,2G10min./1cycle,60min.each along X, Y,Z axes

SAFETY & EMC
Safety Standards	Design refer to LVD
Withstand Voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC /25℃ /70%RH
EMC Emission	Compliance to EN55022(CISPR22)Class B
EMC Immunity	Compliance to EN61000-4-2,3,4,6,8, EN55024, heavy industry level, criteria A

OTHERS
Dimension	*1599738mm(LWH)*
Weight	0.48Kg
Packing	24pcs/12.7Kg/0.75CUFT

NOTE
1. All parameters NOT specially mentioned are measured at 12,24,48VDC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.