Name: 350W 24V single output OMD switch power supply
Brand: Leyu
Availability: InStock

Product Details

350W 24V single output OMD switch power supply

Features:

2:1 wide input range

Protections: Short circuit / Overload / Over voltage / Over temperature

1500VAC I/O isolation

Forced air cooling by built-in DC Fan

100% full load burn-in test

24V (B) and 48V(C) input voltage design refer to LVD

1 year warranty

SPECIFICATION
OUTPUT
Model	SD-350B
DC Voltage	5V	12V	24V	48V
Rated Current	57A	27.5A	14.6A	7.3A
Current Range	0~57A	0~27.5A	0~14.6A	0~7.3A
Rated Power	285W	330W	350.4W	350.4W
Ripple & Noise	100mVp-p	120mVp-p	150mVp-p	200mVp-p
Voltage Adj. Range	4.5~5.5VDC	11~16VDC	23~30VDC	43~53VDC
Voltage Tolerance	±2.0%	±1.0%	±1.0%	±1.0%
Line Regulation	±0.5%	±0.3%	±0.2%	±0.2%
Load Regulation	±1.0%	±1.0%	±1.0%	±1.0%
Setup, Rise Time	300ms,50ms at full load

INPUT
Voltage Range	19~36VDC
Efficiency	74%	80%	80%	84%
DC Current	14.4A/24V	16A/24V	17.6A/24V	17.6A/24V

PROTECTION
Over Load	105~135% rated output power
	Protection type: Shut down o/p voltage,re-power on to recover
Over Voltage	5.75~6.75V	16.8~20V	31.5~37.5V	53~65V
	Protection type: Shut down o/p voltage,re-power on to recover
Over Temperature	95℃± 5℃(TSW1) detect on main power transistor
	Protection type: Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT
Working Temp.	-20~+60℃ (Refer to “Derating Curve”)
Working Humidity	20~90%RH non-condensing
Storage Temp., Humidity	-40~+85℃,10~95%RH
Temp. Coefficient	±0.03%/℃ (0~50℃)
Vibration	10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC
Safety Standards	IEC60950-1CB approved by TUV(for D type only)
Withstand Voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC /25℃ /70%RH
EMC Emission	Compliance to EN55022(CISPR22) Class B
EMC Immunity	Compliance to EN61000-4-2,3,4,6,8,light industry level,criteria A

OTHERS
Dimension	21511550mm(LWH)
Weight	1.1Kg
Packing	12pcs/14.4Kg/0.92CUFT

NOTE
1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.