Product Details

Specifications

DC-DC Converter 24V 5V
1.CE Rohs approved
2.Miniature size with complete protections and light weight
3.2 years warranty

25W DC-DC Converter 24V 5V

25W Single Output DC-DC Converter SD-25 series

Features :

2:1 wide input range

Protections: Short circuit / Overload / Over voltage

1500VAC I/O isolation

Built-in EMI filter, low ripple noise

100% full load burn-in test

Fixed switching frequency at 83KHz

Low cost High reliability

2 years warranty

SPECIFICATION
OUTPUT
Model	SD-25A-5	SD-25B-5	SD-25C-5	SD-25A-12	SD-25B-12	SD-25C-12	SD-25A-24	SD-25B-24	SD-25C-24
DC Voltage	5V			12V			24V
Rated Current	5A			2.1A			1.1A
Current Range	0 ~ 5A			0 ~ 2.1A			0 ~ 1.1A
Rated Power	25W			25.2W			26.4W
Ripple & Noise	100mVp-p			120mVp-p			150mVp-p
Voltage Adj. Range	4.75~5.5VDC			11-16VDC			23-30VDC
Voltage Tolerance	±2.0%			±1.0%			±1.0%
Line Regulation	±0.5%			±0.3%			±0.2%
Load Regulation	±0.5%			±0.3%			±0.2%
Setup, Rise, Hold Up Time	2.5s, 50ms, ------ at full load

INPUT
Voltage Range	A: 9.2 ~18VDC B:19 ~ 36VDC C:36~72VDC
Efficiency	71%	72%	74%	72%	75%	78%	75%	78%	81%
DC Current	3.2A/12V			1.6A/24V			0.8A/48V

PROTECTION
Over Load	105 ~ 150% rated output power
	Protection type : Hiccup mode, recovers automatically after fault condition is removed
Over Voltage	5.75 ~ 6.75V/10% load			16.8 ~ 20V/10% load			31.5 ~ 37.5V/10% load
	Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT
Working Temp.	-10 ~ +60℃ (Refer to “Derating Curve”)
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp., Humidity	-20 ~ +85℃, 10 ~ 95% RH
Temp. Coefficient	±0.03%/℃ (0 ~ 45℃)
Vibration	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC
Safety Standards	Design refer to LVD
Withstand Voltage	I/P-O/P: 1.5KVAC I/P-FG:1.5KVAC O/P-FG: 0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH
EMC Emission	Compliance to EN55022 (CISPR22) Class B
EMC Immunity	Compliance to EN61000-4-2, 3, 4, 6, 8, EN55024, heavy industry level, criteria A

OTHERS
Dimension	999736mm (LWH)
Weight	0.38kg
Packing	45pcs/17.8kg/0.9CUFT

NOTE
1. All parameters NOT specially mentioned are measured at 12,24,48VDC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Product Description