incinerator for hospital medical waste
USD $10,100 - $39,000 /Set
Min.Order:1 Set
Qingdao Yimei Environment Project Co., Ltd.
LDF series medical waste incineration installation with the characteristic of small size, high efficiency and reasonable incineration, leading technology, higher harmless degree, is the ideal garbage treatment facilities apply to all kinds of hospital, hotel, station.
Main Features:
1. The gasifying incineration technology to be applied to the incineration injector, feeding container and other medical equipment as well as different paper slash, bandage, cotton column, different kinds of medical pollutants and various wastes discharged by hospitals and medical organization.
2. The gasifying incineration way is utilized and the rubbished produced each day is able to handle the one-off incineration treatment.
3. The gasifying incineration, mixed incineration, burn-out treatment and other technologies are used to make the content of the smog exhaust and dust lower than the discharge standard regulated by the nation.
4. Fully seal operation is adopted to be applied to dealing with the infectious medical waste and avoid the secondary pollution.
5. Small volume and site area.
6. The series of incinerator are divided into the fuel and gas kind which can be selected according to the different needs of the users.
LDF-300 Model Medical Waste Incinerator
Table 1
Applicable hospital size (number of beds) | 300-500beds |
Burning Ability | 200-300kg/ times (daily incineration3-6 times) |
Size of the Burner | 2.2m×1.4m×3.8m |
Volume of the Burner | Gasification room2.4m3,secondary bumingroom1.2m3,drift a long buming a room0.16m3 |
Size of the filling entrance | 900mm×1100mm |
Chimney | Height 10m out-radius 400mm |
Blower | Power 1.1kw |
Combustion-support combustion machines | Power 0.22kw,fuel consumption7-14kg/h |
Re-burning machine | Power 0.37kw,fuel consumption10-20kg/h |
Running voltage | 220V or 380V |
Weight | About9000 |
LDF-300 standard configuration
No | Name | Amount | Specifications | Notes |
1 | Incinerator | 1 | A3 steel refractories
| Main part |
2 | Second combustion chamber and the combustion chamber mixed | 1 | A3 steel refractories
| Installed in the main body |
3 | Electric box
| 1 |
| The main body
|
4 | Fluegas purification system | 1 | A3 steel refractories
| Installed in the main body |
5 | Combustion burner | 1 | BTL-10 | The main body
|
6 | Reburning burner | 1 | BTL-26G | The main body
|
7 | blower | 1 | 1100W/220V/380V | The main body
|
8 | Ash rake | 1 | 200mm×3000mm | Shandong green
|
9 | Pump | 1 |
| The main body
|
10 | fuel tank | 1 |
| The main body
|
11 | fuel tank bracket | 1 | 500mm×2200mm | Shandong green
|
12 | Chimney | 2 | 400mm×5000mm | Shandong green |
13 | Filter switch | 5 |
| The main body
|
14 | Thermocouple | 2 | 1200℃ | The main body
|
15 | Operational procedures | 1 |
| The main body
|