Dosing PE tank for RO system
Negotiable /Set
Min.Order:1 Set
Qingdao Yimei Environment Project Co., Ltd.
Dosing PE tank for RO system
The PE mixing dosing tank is consisted of plastic tank and mixer for liquid, tank body, it is Rotomolding a molding tank which adopting imported PE raw material.
Preinstall metering pump and mixer installation site, mixer,dosing tank,metering pump three in one, convenient to use.
The product is tough, flexible, anti-impact and corrosion-resistant. The matching mixer is divided of direct stir and side stir, the direct mixer requires matched strengthening board and tanks, while the side mixer can be equip with fixed mount to improve its stir effect and tank body service life. The types of stirrer material is stainless steel
Advantage:
The product is tough, flexible, anti-impact and corrosion-resistant. The matching mixer is divided of direct stir and side stir, the direct mixer requires matched strengthening board and tanks, while the side mixer can be equip with fixed mount to improve its stir effect and tank body service life. The types of stirrer material is stainless steel.
Apply scope: in water treatment mainly used in all kinds of agentia
mixing,dissolve,storage, then pass by metering pump to dose solution .
projects .
Main components:
1.Metering pump
-Mechanical actuated diaphragm, no-leakage structure
-PVC,PTFE, PVDF,304,316 is available as the pump head material
-flow can be adjusted during operation, the range is 0.5~500L/h
Pressure range:0.2~1 Mpa
-Automatic control who can accpet4~20mA is available (JWM-AD series)
-Motor: standard 220V/380V,50Hz
Regulating mode: manual / automatic
2.mixer
Rated power :0.18~11kW;
mixer diameter: 0.4~3m
mixing speed:60~200rpm
3.Solution tank
Material:PE,PVC
Volume :1000L
Dosing Tank size: 40L/80L/100L/120L/180L/200L/300L/500L/1000L/20
00L/3000L/4000L/5000L
Mixer power: 0.18KW/0.37KW/0.55KW/0.75KW/1.1KW/1.5KW/2.2KW/3KW/4KW/5.5KW/7.5KW/11KW