Product Details

Specifications

fessional scheme for chemical reaction kettle
2.imported compressor
3.high efficiency
4.precise control
5.CE, ISO9001

5ton low price chemical reaction kettle water chiller

---special design, manufacture, supply, install and commissioning the refrigerating chillers whose cooling capacities range from 3ton to 500ton for chemical reaction kettle cooling

Benefits

· Fully Packaged with Internal Pump and Water Tank

· Lowest Operating Costs

· Generous Operating Limits

· Weatherproof Construction (Box type)

· Individually Tested for Assured Quality

· Extremely Precise Water Temperature Control

Features

· Scroll compressors

· Eco-friendly & energy efficient

· CE and ISO9001 certificated

· Innovative Evaporator-in-tank configuration for increasing efficiency

· Stainless Steel storage tank with therm-insulation packing

I.Applications

KN brand industrial chillers are the perfect solution for any application, in particular for the plastic field, such as : injection molding, extrusion(sheet & profile), blow molding, thermoforming, PET, plastic cast film, and other industrial field : electroplating (surface treatment), medicine, chemical, hydraulic system, leaser, shoe-making, electronic, print, ship making, steel and iron making, food industry, seafood industry, ultrasonic industry, NCP industry, lab application, printing industry, purification industry, sauna industry, concrete mixing, etc

II.Quality in each parts

KN brand CE and ISO9001 certificated chillers adopt international name brand compressors made in USA,Germany, Italy and Japan, etc and electric parts to guarantee long working hours and high efficiency, and each chiller is equipped with numerous safety devices for key parts to ensure the safety of the operating personnels. Quality, reliability and energy-saving are the three core philosophies embodied in all KN products

technical parameters of 5ton low price chemical reaction kettle water chiller

Operation Manual

1.1 Preparation to start

1.1.1 Check the machine is in good condition, the tubes are connected correctly, the cable is connected correctly,

and the power meets the requirement of relative regulations.

1.1.2 All the adjust valve is on right position. The cooling tower is running with full water.

1.1.3 Before turning on the machine, please turn on the chilling water pump to confirm that the cooling there is enough water in tower.

1.2. Machine Running

1.2.1 After checking the cables and the tubes, turn the power switch, the power will first check the phase sequence, if the phase is reversed, the trouble light is on, please change the sequence of any two power phase and then re-turn on the machine.

1.2.2 First turn on the water pump. After the chilling water is circulating, turn on the compressor and adjust the relative temperature, the machine enters automatic delay start state. Pay attention to that the temperature predetermined should not be lower than 5°C, in order to avoid freezing.

1.3 For the first time the compressor is turned on, the following items should be paid attention:

a) First offer the machine power supply more than 12 hours.

b) The operator should first be family with the control box and its function.

1.4 Operation

a) Start up operation

1) First turn on the cooling pump and the cooling tower, confirm their running is normally.

2) Press ON key, then compressor enter delayed starting up.

3) Press COMP1, COMP2 key to choose the compressor.

b) close down operation

1) Press OFF key when the compressor is running, compressor will enter delayed running off.

2) Turn off the cooling pump and the cooling tower.

1.4.4 Water temperature setup