Product Details

100kg Meat Harmless Treatment Equipment Processing Capacity Instructions: Processing capacity: 100kg/batch Daily processing capacity: 200kg - 300kg
1. Processing time: 3 - 4h Note: Calculated based on a 12-hour working day, 3 batches (100kg * 3 = 300kg) can be processed per day. 200kg - 300kg can be processed per day. (Taking the treatment of dead pigs due to swine fever as an example, calculated based on approximately 100kg per pig, 300kg ÷ 100kg = 3 pigs. A 100kg wetting machine can handle approximately 2 - 3 pigs per day.)
2. In the event of an epidemic situation: In the case of a major epidemic, this equipment can operate at full capacity continuously, and the processing capacity is doubled, allowing it to work at full capacity.
3. Materials after processing: After high-temperature treatment, the materials can be composted and used as raw materials for organic fertilizers, or sent to biogas digesters for fermentation, or processed together with animal feces.
4. Exhaust: After processing, pressure is released and exhausted. The exhausted gas can be directly discharged into the air after being filtered by the deodorizer, without causing secondary pollution.

Harmless Treatment Equipment Operating Procedures:
1. Conduct surface treatment of the diseased livestock carcasses in the wetting preparation room. Treatment methods include: pool immersion or ultraviolet light, etc. Divide the ordinary diseased livestock carcasses, and then prepare for wetting. For major epidemic diseased livestock carcasses, do not divide them, and prepare the whole for wetting.
2. Use a material transport vehicle to transport the diseased livestock carcasses or carcass pieces prepared for wetting into the wetting machine, close the machine door, and at the same time close the manual interlock. Inject 0.3Mpa compressed air into the machine door sealing ring to seal the wetting machine. Then, check whether all valves of the wetting machine are completely closed. After checking and confirming that there are no errors, turn on the power supply of the distribution box, set the wetting temperature through the temperature controller (generally around 150°C), and then inject steam into the wetting machine. At the same time, open the exhaust valve. After approximately 3 minutes, the cold air in the machine is discharged. Close the exhaust valve for wetting. Under a high pressure of 0.55Mpa and a high temperature of 150°C, after a period of time, the wetting is completed (the wetting time is adjusted by the operator according to the size and quantity of the materials being processed in the machine). At this time, it is necessary to first open the silencer valve of the deodorizer, then open the exhaust valve of the wetting machine to release the pressure. When the pressure is released to below 0.02Mpa, close the exhaust valve and stop the pressure release.
3. Gradually open the valve between the wetting machine and the oil-water separator, and transfer the oil-water mixture after wetting into the oil-water separator. Then, close the valve and let the oil-water mixture stand for more than 1 hour. Open the exhaust valve of the wetting machine again to release the pressure in the wetting machine. Then, open the manual safety interlock, open the machine door, and transport the residue after wetting out.
4. One hour after the wetting is completed, open the water discharge valve of the oil-water separator to discharge the wastewater. When the oil-water boundary line is 1cm lower than the oil discharge port, close the water discharge valve.
5. Open the oil discharge valve of the oil-water separator, and let the separated oil flow into the container for storage and sale.

Zhucheng Dejun Environmental Protection Technology Co., Ltd. is engaged in the development of environmental protection products and technologies, environmental protection projects, the operation of environmental protection facilities, and technical services. The company is located in Zhucheng City, Shandong Province, which is a well-known top 100 county in China. The company has an academic, experienced, and highly dedicated R & D and engineering technical team. The company adheres to serving customers with high and new technologies, and wins the trust of users with excellent product quality. While the company is developing rapidly, it has received extensive respect and praise from the industry and customers.

Focusing on serving meat breeding, production and processing enterprises, the product specifications range from small to large, suitable for small slaughtering (breeding) points, small slaughtering (breeding) farms, medium and small slaughtering (breeding) factories, and large and extra-large slaughtering (breeding) enterprises. Customized production can be carried out according to customer requirements.