Product Details

The Usage Method of the Moisturizing Machine1. Conduct surface treatment of the diseased livestock carcasses in the moisturizing preparation room. Treatment methods include: pool soaking or ultraviolet light, etc. Divide the common diseased livestock carcasses, and then prepare for moisturizing. For the carcasses of livestock with major epidemic diseases, do not divide them, but prepare the whole for moisturizing.
2. Use the material transport vehicle to transport the diseased livestock carcasses or carcass pieces that are ready for moisturizing into the moisturizing machine, close the machine door, and at the same time close the manual interlock, and inject 0.3Mpa compressed air into the machine door sealing ring to seal the moisturizing machine. Then, check whether all the valves of the moisturizing machine are completely closed. After checking and confirming that there are no errors, turn on the power supply of the distribution box, set the moisturizing temperature through the temperature controller (generally around 150°C), and then inject steam into the moisturizing machine. At the same time, open the exhaust valve. After about 3 minutes, the cold air in the machine is discharged. Close the exhaust valve for moisturizing. Under the high pressure of 0.55Mpa and the high temperature of 150°C, after a period of time, the moisturizing is completed (the moisturizing time should be adjusted by the operator according to the size and quantity of the materials being processed in the machine). At this time, it is necessary to first open the silencer valve of the deodorizer, and then open the exhaust valve of the moisturizing machine to relieve the pressure. When the pressure is reduced to below 0.02Mpa, close the exhaust valve and stop the pressure relief.
3. Gradually open the valve between the moisturizing machine and the oil-water separator, and transfer the moisturized oil-water mixture into the oil-water separator. Then, close the valve and let the oil-water mixture stand for more than 1 hour. Open the exhaust valve of the moisturizing machine again to completely release the pressure in the moisturizing machine. Then, open the manual safety interlock, open the machine door, and transport the moisturized residues out.
5. One hour after the moisturizing is completed, open the water drain valve of the oil-water separator to discharge the waste water. When the oil-water boundary line is 1cm lower than the oil drain port, close the water drain valve.
6. Open the oil drain valve of the oil-water separator to allow the separated oil to flow into the container for storage and sale.

无害化 Treatment Equipment 100kg Meat无害化 Treatment Equipment Processing Capacity Description The processing capacity description of the meat无害化 treatment equipment: Batch processing capacity: 100kg/batch Daily processing capacity: 200kg - 300kg
1. Processing time: 3 - 4h Note: Calculated based on a 12-hour working day, 3 batches can be processed per day (100kg * 3 = 300kg). 200kg - 300kg can be processed per day. (Taking the treatment of dead pigs as an example, calculated based on approximately 100kg for each pig, 300kg ÷ 100kg = 3 pigs. A 100kg moisturizing machine can handle about 2 - 3 pigs per day).
2. In case of epidemic situations: In the event of a major epidemic, this equipment can operate at full capacity continuously, and the processing capacity is doubled, and it can work at full capacity.
3. Materials after processing: After high-temperature treatment, the materials can be composted and used as raw materials for organic fertilizers, or sent to biogas digesters for fermentation, or processed together with animal feces.
4. Exhaust: After the treatment is completed, the pressure is released and the exhaust gas is discharged. The exhausted gas can be directly discharged into the air after the filtering effect of the deodorizer, without causing secondary pollution. 无害化 Treatment Equipment The Working Principle and Processing Method of the Breeding Waste Treatment Equipment The working principle of the breeding waste treatment equipment: Using high-pressure saturated steam to directly contact the tissues of dead and diseased livestock and poultry. When the steam condenses into water upon encountering the dead and diseased livestock and poultry, a large amount of heat energy is released, which can melt the grease and coagulate the protein. At the same time, with the help of high temperature and high pressure, the pathogens can be completely killed. The breeding waste treatment equipment is a machine and equipment that uses the moisturizing principle to treat the dead and diseased livestock and poultry or the diseased parts through high-temperature and high-pressure treatment.

The Equipment Characteristics of the Breeding Waste Treatment Equipment:
1. This equipment has a beautiful appearance, a compact structure, occupies a small area, and is safe and convenient to operate and use.
2. This equipment is equipped with safety devices such as pressure gauges and safety valves, and is safe and reliable to use.
3. This equipment uses steam as the heat source and has no other energy consumption. It has a large heating area, a fast temperature and pressure rise, and a high working efficiency, which greatly shortens the harmless treatment time.

Zhucheng Dejun Environmental Protection Technology Co., Ltd. is engaged in the development of environmental protection products and technologies, environmental protection projects, operation of environmental protection facilities and technical services. The company is located in Zhucheng City, Shandong Province, which is a well-known top 100 county in China. The company has an academic, experienced and highly dedicated R & D and engineering and technical personnel team. The company adheres to serving customers with high and new technology, and wins the trust of users with excellent product quality. While the company is developing rapidly, it has received extensive respect and praise from the industry and customers.

Focusing on serving meat breeding, production and processing enterprises, the product specifications range from small to large, suitable for small slaughtering (breeding) points, small slaughtering (breeding) farms, medium and small slaughtering (breeding) factories and large and extra-large slaughtering (breeding) enterprises, and can be customized according to customer requirements.