Product Details

100kg Meat Harmless Treatment Equipment Processing Capacity Description: Processing capacity: 100kg/batch Daily processing capacity: 200kg - 300kg
1. Processing time: 3 - 4h Note: Calculated based on a 12-hour working day, 3 batches can be processed per day (100kg * 3 = 300kg), and 200kg - 300kg can be processed per day. (Taking the treatment of dead pigs as an example, calculated based on about 100kg per pig, 300kg ÷ 100kg = 3 pigs, and the 100kg wetting machine can handle about 2 - 3 pigs per day).
2. In case of an epidemic situation: In the event of a major epidemic, this equipment can operate at full capacity continuously, and the processing capacity is doubled, and it can work at full capacity.
3. Materials after processing: After high-temperature treatment, the materials can be composted and used as raw materials for organic fertilizers, or sent to biogas digesters for fermentation, or treated together with animal manure. 4. Exhaust: After the treatment, the pressure is released and the exhaust gas is discharged. The exhausted gas can be directly discharged into the air after being filtered by the deodorizer, without causing secondary pollution.

Harmless Treatment Equipment Operating Procedure:
1. Carry out surface treatment of the diseased livestock carcasses in the wetting preparation room. Treatment methods include: pool immersion or ultraviolet light, etc. Divide the common diseased livestock carcasses, and then prepare for wetting. For major epidemic diseased livestock carcasses, do not divide them, and prepare the whole for wetting.
2. Transport the diseased livestock carcasses or carcass pieces to be wetted into the wetting machine with a transport vehicle, close the machine door, and at the same time close the manual interlock, and inject 0.3Mpa compressed air into the machine door seal ring to seal the wetting machine. Then, check whether all valves of the wetting machine are closed. After checking and confirming that there are no errors, turn on the power supply of the distribution box, set the wetting temperature through the temperature controller (generally around 150°C), and then inject steam into the wetting machine. At the same time, open the exhaust valve. After about 3 minutes, the cold air in the machine is discharged, and then close the exhaust valve for wetting. Under a high pressure of 0.55Mpa and a high temperature of 150°C, after a period of time, the wetting is completed (the wetting time is adjusted by the operator according to the size and quantity of the materials in the machine). At this time, it is necessary to first open the silencer valve of the deodorizer, and then open the exhaust valve of the wetting machine to release the pressure. When the pressure is released to below 0.02Mpa, close the exhaust valve and stop the pressure release.
3. Gradually open the valve between the wetting machine and the oil-water separator, and transfer the wetted oil-water mixture into the oil-water separator, and then close the valve and let the oil-water mixture stand for more than 1 hour. Open the exhaust valve of the wetting machine again to release the pressure in the wetting machine completely, and then open the manual safety interlock, open the machine door, and transport the wetted residue out.
4. One hour after the wetting is completed, open the drain valve of the oil-water separator to discharge the wastewater. When the oil-water boundary is 1cm lower than the oil discharge port, close the drain valve.
5. Open the oil discharge valve of the oil-water separator, and let the separated oil flow into the container for storage and sale.

Zhucheng Dejun Environmental Protection Technology Co., Ltd. is engaged in the development of environmental protection products and technologies, environmental protection projects, the operation of environmental protection facilities, and technical services. The company is located in Zhucheng City, Shandong Province, a well-known top 100 county in China. The company has an academic, experienced, and highly dedicated R & D and engineering and technical personnel team. The company insists on serving customers with high and new technologies, and gains the trust of users with excellent product quality. While the company is developing rapidly, it has received extensive respect and praise from the industry and customers.

Focusing on serving meat breeding, production and processing enterprises, the product specifications range from small to large, suitable for small slaughtering (breeding) points, small slaughtering (breeding) farms, small and medium-sized slaughtering (breeding) factories, and large and extra-large slaughtering (breeding) enterprises. Customized production can be carried out according to customer requirements.