Product Details

Suitable oil types:

Used hydraulic oil filtration system has a very wide range of applications and is suitable for the purification and regeneration of various lubrications in petroleum, chemical, mining, metallurgy, electric power, transportation, machinery manufacturing, railway and other industries, and has significant economic benefits.

Advantages

1. The ability to filter impurities is strong, and the large-area and deep-level precision filter material can remove fine particles in the oil.

2. Automatic backwash function: automatically clean the filter to trap a large amount of impurities.

3. Advanced medium endothermic condensation system.

4. The used hydraulic oil filtration system is equipped with pressure protection, automatic temperature control heating, automatic separation of condensate water device, and drainage during line operation. The operation is simple, safe and reliable.

5. High-quality filter material is used, which has large dirt holding capacity, corrosion resistance, high temperature resistance, high mechanical strength, high impurity removal accuracy and long service life.

6. Unique degassing and dehydration system: It adopts three-dimensional evaporation technology and multi-level oil-water separation technology to quickly separate water, gas and impurities in oil.

Working site

Technical Parameter

Index name	Unit	ZJD -10	ZJD -20	ZJD -30	ZJD -50	ZJD -75	ZJD -100	ZJD -150
Flow rate	Litres / hour	600	1200	1800	3000	4500	6000	9000
Vacuum degree	Mpa	-0.06 - -0.095
Working pressure	Mpa	≤0.4
Temperature range	C	0 - 100
Water content	PPm	≤80
Cleaness	NAS	≤6(Class)
Gas content	%	≤0.1
Impurities content		3-5Micron
Power Supply		380V/3phase/50HZ （can be designed based on user’s requirement）
Noise	dB(A)	≤75	≤75	≤75	≤78	≤78	≤78	≤80
Demulsifying Value	min	New oil≤8,Operating oil≤15
Heating Power	kw	36	40	45	72	80	90	120
Total Power	Kw	38	42	47	75	87	101	135
Diameter of inlet&outlet	mm	25	25	25	32	42	50	50
Wight	Kg	450	550	600	750	850	1000	1200
Dimension(mm)	Length	1300	1350	1400	1500	1600	1650	1750
	Width	900	950	1000	1150	1250	1300	1400
	Height	1600	1600	1650	1700	1700	1750	1950

Preparation before use

1. All parts of the used hydraulic oil filtration system have been adjusted and tested before leaving the factory. When they are transported to the site of use, they must be checked whether they are in good condition.

2. The oil filter is placed smoothly, the oil inlet is connected to the oil discharge port at the lower part of the oil tank, and the oil outlet is connected to the upper part of the oil tank.

3. After long-distance transportation, it is necessary to re-tighten the connection parts of various components, such as connecting flanges, filter cover plates, etc.