German technical background VOK ®- Disper U100 Wetting Dispersant

VOK ®- Disper U100 is a wetting and dispersing agent for solvent based industrial and architectural coatings to stabilize inorganic pigments.

Product Information

chemical composition 

Unsaturated polyamine amide and low molecular weight acid polyester salt.

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Amine value: 35 mg KOH/g

Acid value: 50 mg KOH/g Density (20 ° C): 1.01 g/ml

Storage and transportation

Mix well before use. Layering or turbidity may occur during storage and transportation. Heat to 30-60 ° C and mix thoroughly before use.

Application field

Paint and adhesive

Features and Benefits

The additive can deflocculate the pigment by stabilizing the steric hindrance. Because the particle size of the deflocculating pigment is small, it can obtain high gloss and improve color intensity. In addition, the transparency of transparent pigments and the hiding power of opaque pigments are also improved, while the viscosity is reduced. This also improves the leveling performance and increases the pigment content.

Recommended use

It is especially recommended for architectural coatings and anti-corrosion coating systems, if the amount of organic solvent added to the formula needs to be as low as possible.

Recommended dosage

The amount of additives (purchased form) is based on the pigment.

Inorganic pigment: 0.5-1%

Titanium dioxide: 0.2-0.5%

Organic pigment: more than 1-5% of the recommended amount is for reference, and the appropriate amount needs to be determined through a series of tests.

Adding method and processing guidance

In order to obtain good performance, additives must be added to the grinding material first, and then the pigment.