German technical background VOK ®- AP 241 wax dispersion

VOK ®- AP 241 wax dispersion, based on oxidized high-density polyethylene (HDPE) wax, is used to improve the surface protection of solvent based systems.

Product Information

Chemical composition

Oxidized high density polyethylene (HDPE) wax dispersion

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Non volatile matter (60 minutes, 125 ℃): 20%

Carrier: xylene/butyl acetate 1/1

Melting point (wax component): 135 ° C

Particle size (Hegemann): 25 µ m Viscosity (23 ℃): 300 mPa · s

Storage and transportation

Sensitive to temperature. It must be stored and transported at a temperature lower than 35 ℃. Mix well before use.

Application field

Special precautions

The additive is preferably added at a low shear rate. Mix well before use.

Product features and advantages

The additive improves scratch resistance and softness. At the same time, it can reduce the settlement in the tank and has the effect of extinction. It can be used in solvent furniture, floor varnish and industrial coatings.