Stainless steel flat-rolled products, including stainless steel plate, diamond plate, 2B & 2D stainless steel sheet, stainless steel polished sheet, stainless steel flat & expanded sheet, and perforated stainless steel sheet.

Cold-rolled sheets in multiple finishes and dimensions are highly appreciated for high performance and premium quality.

GRADE

• Grade 304/304L (UNS S30400/S30403, EN 1.4301/1.4307)

• Grade 316L (UNS S31603, EN 1.4404)

• Grade 409L (UNS S40900, EN 1.4512)

• Grade 430 (UNS S43000, EN 1.4016)

• Grade 441 (UNS S44100, EN 1.4509)

STANDARD

• ASTM A240M – Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications.

• ASTM 480M – General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet and Strip

• EN 10088-2

FINISH AND SPECIFICATION

No.1  

- A rough, dull surface, results from hot rolling to the specified thickness, followed by annealing and descaling.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 3.0~6.0 

- 8.0~100.0

2D  

- Dull finish results from cold rolling followed by annealing and descaling, and may perhaps get a final light roll pass through unpolished rolls. A 2D finish is used where appearance is not a concern.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~3.0

2B

- (Mill Finish) A bright, cold-rolled finish resulted in the same manner as the 2D finish, except that the annealed and descaled sheet received a final light roll pass through polished rolls. This is the general-purpose cold-rolled finish that can be used as is or as a preliminary step to polishing

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~6.0

BA

- (Bright Anneal) The bright annealed mill surface is obtained by annealing the material under an atmosphere, so that scale is not produced on the surface.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~2.0

Brushed Finish

- (No.3/No.4/No.5/No.6) This is a ground unidirectional finish obtained with 150/180/240/320 grit abrasive, which is characterized by parallel brushing lines, it is also known as Satin.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~6.0

Scotch Brite 

- It's a semi-dull finish with uniform grain, which is obtained using finer abrasives than No.4/NO.5/NO.6. This finish has smooth, soft, and exquisite grains which have a low level of reflectivity and unidirectional texture.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~3.0

Hairline  

- Seemingly endless polishing lines extend uniformly along with the length of the coil giving the hairline. It's a well-defined directional finish with long-grain and fine-line.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~3.0

Super Mirror

- (No.8) This is a polished finish having a high degree of reflectiveness which can be done on all grades of stainless steel. It is produced by progressively using finer abrasives and finally finishing with extremely fine buffing compounds. The final surface is blemish free with a high degree of image clarity.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~6.0

Vibration 

-It is a multi-directional finish. It is also known by the names Non-Directional Satin and Angel Hair. Vibration has a uniform texture with random, multi-directional grit lines.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~3.0

CD Overlay 

- CD Overlay is a patterned polished steel finish that is applied mechanically to the surface of stainless steel sheets. These stainless polished steel finishes can be created with various visual effects, which are designed for architectural and other applications.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~3.0

Bead Blast  

- This finish results in a non-directional textured surface with a soft satin reflection and low reflectivity. This finish has an aesthetic appeal and enhances the surface properties of stainless steel.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~2.0  

Etched Finish 

- Etched patterns are created by selectively applying a protective acid-resistant film to a highly polished surface and acid etching the unprotected areas. The etching removes a thin layer of stainless steel, changes the color to a dull silver gray, and roughens the surface. The etched finish made an attractive surface on the metal, which is applied to architectural and other applications.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~3.0

Embossed Finish  

- The embossed finish is a stainless steel finish that is uniformly textured. There are two main types of Embossed Finish: a 1-sided pattern, where the reverse side is painted; another one is a 2-sided pattern where the pattern is imprinted through to the reverse side.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~3.0

PVD Coating  

- Physical Vapor Deposition (PVD) is a process to produce a metal vapor (titanium, chromium, and aluminum) that can be deposited on electrically conductive materials as a thin highly adhered pure metal or alloy coating. The process is carried out in a vacuum chamber at vacuum using a cathodic arc source. A wide variety of colors can be achieved by adding other gases during the deposition.

- Range (mm): 1000, 1219, 1250, 1500, 1524

- 0.3~3.0

• Special dimensions were accepted on request

• Customized specific cut-to-length is acceptable from 100mm - 4000mm

PACKING

• Standard Coating: Paper Interleaved, PE or Laser PE Coating are available

• Standard Package: Waterproof wrapping and cardboard encase all the packs of sheets, with metal edge production for all top edges. The strap is aligned from the bottom bearer to the top, with edge protection on all top corners that meet the sheets

• Wooden Pallets or customized Pallets are acceptable

• Metal Pallets are acceptable upon request

Applications:

Typical applications include:

- Food preparation equipment particularly in chloride environments.

- Laboratory benches & equipment.

- Coastal architectural paneling, railings & trim.

- Boat fittings.

- Chemical containers, including for transport.

- Heat Exchangers.

- Woven or welded screens for mining, quarrying & water filtration.

- Threaded fasteners.

- Springs.

Stainless steel checkered plate due to their excellent corrosion resistance and slip resistance has been used in many industries.

The first stainless steel checkered plate pattern style for the horizontal and vertical stripes interlaced. In the next 20-30 years, through continuous research and improvement of the experiment with the non-slip pattern for better design.

In recent years the use of stainless steel checkered plates are continuously innovative, breakthrough, and changed, and the application of industry and product models is continuously increasing, and the rate of replacement product updates and more frequent.

Stainless steel checkered plate due to their excellent corrosion resistance and slip resistance has been used in many industries.

The first stainless steel checkered plate pattern style for the horizontal and vertical stripes interlaced. In the next 20-30 years, through continuous research and improvement of the experiment with the non-slip pattern for better design.

In recent years the use of stainless steel checkered plate are continuous innovation, breakthrough, and change, application of industry and product models are continuously increasing, and the rate of replacement product updates and more frequent.

Mirror (No.8, Non-Directional) is a high gloss, polished finish, having a high degree of reflectiveness which can be done on all grades of stainless steel. It is produced by progressively using finer abrasives and finally finishing with extremely fine buffing compounds. The stanch Mirror surface is blemish free and has a perfect reflective quality. 

Hot Tags: stainless steel sheet no.4, China, suppliers, manufacturers, price