Specification:

- Name: Stainless Steel Fittings

- Type: seamless, welded

- Shape: elbow, tee, reducers, union, etc.

- Grade available: 304, 304L, 304H, 316/316L, 316Ti, 317, 317L, 321, 321H, 309S, 310, 310S, 347, 347H, 904L, Duplex steel S31803 (2205), S32750 (2507), Inconel600, 625, Incoloy800/800H, 825, etc.

- Size available: seamless DN15 - DN600 (1/2" - 22"), 1/2" to 20", SCH 10/ 40/ 80/ 160

- Size available: diameter from 20mm to 600mm, thickness from 1mm to 35 mm

- Specification: GB/T 12459, GB/T13401, SH3409, HG/T21635, HG/T21631, ASME B16.9, MSS SP-43, DIN260

- Name: Stainless Steel Flange

- Type: plate-type flat welding flange (PL), slip-on necking flange (SO), welding neck flange (WN), socket welding flange (SW), etc.

- Grade available: 304, 304L, 304H, 316/316L, 316Ti, 317, 317L, 321, 321H, 309S, 310, 310S, 347, 347H, 904L, Duplex steel S31803 (2205), S32750 (2507), Inconel600, 625, Incoloy800/800H, 825,etc.

- Size available: DN10-DN1000

- Specification: GB9112-9131, SH3406, ANSI B16.5, DIN2576、27、66, DIN2632-2638 etc. 5, JISB2313

Stainless Steel BSP Fittings

TS offers a comprehensive range of Stainless Steel 150 LBS Rated BSP Threaded Investment Cast Fittings.

The most commonly requested BSP fittings are from 1/8inch  – 4inch.  Dimensions are in accordance with the American standard ASME B16.3.

1-Piece Ball Valve, Reducing  Bore, 1000 WOG and 3-Piece Ball Valve, Full Bore, 1000 WOG, BSP threaded are also stocked in grade 316 stainless to complement our BSP 150LB fittings. These are stocked from ½” – 2”.

BSP stands for British Standards Pipe (thread). WOG stands for WATER, OIL, and GAS.

In addition to our stock of BSP, fittings are a complete range of Forged High-Pressure fittings 3000 LBS fittings in socket weld and NPT threaded from ½” – 2”. These fittings are manufactured according to ASME/ASTM SA/A182 with dimensions to ASME B16-11. The stock of unions, caps, plugs, tees, reducing tees, 90º & 45º Elbows, full couplings, half coupling, reducing couplings, concentric and eccentric swage nipples.

Stainless Steel Buttweld Fittings

TS offers a range of Stainless Steel Buttweld fittings in 90º and 45º Elbows, Concentric and Eccentric Reducers, End caps, Stainless Steel Equal and Reducing Tees, Stub Ends, and Weld On Collars.

TS carries the full range of Buttweld fittings in both grades 304L and 316L schedule 10s, the 40s, and 80s. Buttweld fittings are stocked in accordance with ASTM /ASME SA/A 403 WP –W (Welded), WP–S (Seamless), and WP- WX (Welded with X-ray).  All material is marked in accordance with the applicable standards and fully traceable to EN 10204 3.1 material certificates.

Weld Fittings are used on permanent installations where process piping and equipment can be cleaned in place (CIP) and removal from the system is not required. Weld Fittings are offered in nominal tube sizes 1/2" through 12" in T304 and T316L materials. Uniform wall thickness for 1/2" through 3" sizes measures .065 (16 ga). In 4" size, wall thickness measures .083 (14 ga), 6" and 8" .109 (12 ga).VNE offers Polished ID and OD Fittings for immediate shipment. Other polished combinations may be ordered. 

Our Weld Fittings meet all 3A requirements.

1. Type: Elbow, Tee, Reducer, Cap, etc, we can supply clients with draft drawings.

2. Size Range

- Seamless Fittings: 1/2-inch to 24-inch

- Weld Fittings: 2-inch to 72-inch

3. Wall Thickness: SCH10, SCH20, SCH30, SCH40, STD, SCH60, SCH80, XS, SCH100, SCH120, SCH140, SCH160, XXS.SGP, DIN

4. Executive Standard

ASME B16.9, MSS SP75, MSS SP43, EN10253, DIN2605, BS1640, BS1965, GOST17375, GOST17376, GOST17378, GOST17379, ISO3419, ISO5251, JIS B2311, JIS B2312, JIS B2313.

5. Material: A234 WPB/C, A420, WPHY 42, WPHY, ST37.0, ST35.8; 304, 304L, 316, 316L.

6. End Treatment: Bevel Ends, Plain Ends, or as per Client Requirments

7. Surface Treatment and Packing

- Sand Blast, Paint Black Lacquer, or Transparent Oil.

- Wooden Case or Wooden Pallet or as per customers' requirements.

Hot Tags: stainless steel butt weld fitting, China, suppliers, manufacturers, price