Control axis: X axis, Z axis, Y axis; The three axes can be set as linear axis or rotary axis control respectively

Interpolation function: Z / X / y three-axis linear interpolation, single axis thread interpolation;

Position command range: - 999999mm ~ 999999mm; Minimum instruction unit: 0.001mm;

Electronic gear: Command multiplication coefficient 1 ~ 99999, command frequency division coefficient 1 ~ 99999

Fast moving speed: up to 30000 mm / min; Fast magnification: F0, 25%, 50%, 100% four level real-time adjustment;

Cutting feed rate: up to 15000 mm / min; Feed rate: 0 ~ 150% sixteen level real-time adjustment;

Manual feed speed: 0mmmn-1260 mm / min, 16 levels of real-time adjustment, or the feed speed can be customized immediately;

Hand pulse feed: 0.001mm, 0.01mm and 0.1mm;

31 g commands, including straight-line and thread processing, as well as various fixed cycle and compound cycle functions;

It can process single head and multi head metric and British straight thread and variable pitch thread; Thread pitch: 0.001mm ~ 500mm or 0.06 tooth inch ~ 25400 tooth inch; Continuous thread can be machined; With tapping function

Spindle encoder: encoder line number, settable range: 100pr ~ 5000pr; Transmission ratio between encoder and spindle: 1:1;

Reverse clearance compensation: 0mm ~ 10.000mm;

Tool compensation: 64 groups of tool length compensation;

Tool setting mode: trial cutting tool setting and fixed-point tool setting; The cutter compensation can be modified when executing the program, and the cutter compensation can be modified with statement instructions;

45 basic m auxiliary function instructions; 25 m instructions customized by the user to realize special function control;

Up to 16 tool positions, set the tool holder type parameters to select the control process of tool change (the system does not control the collection function of the electric tool holder used on the lathe); When the tool holder type is set to 0, the tool change action is not executed. When it is set to 9, the system calls M60 command to execute tool change

Speed switching value control mode: s command 4th gear direct control output range is s01-s04; Or 16 gear BCD code output range is S00 ~ S15;

Speed analog voltage control mode: s command code gives spindle speed per minute or cutting linear speed (constant linear speed control), outputs 0 ~ 10V voltage to spindle frequency converter, spindle stepless speed change, and supports 4 spindle mechanical gears M41 ~ M44

Support the speed and position control mode switching of dap03 servo spindle, and realize the linkage between spindle and Z or X axis;

I / O function diagnosis display

I / O function: 23 point input and 18 point output

Declarative macro instruction: assignment statement: complete assignment, multiple arithmetic and logic operations;

Conditional statement: complete conditional judgment and jump;

Display: true color liquid crystal display (LCD), LED or CCFL backlight

Display mode: Chinese or English display interface is set by parameters;

Program capacity: 255 programs at most, with a total program capacity of 4400k8;

Editing mode: full screen editing, supporting mixed programming of relative absolute coordinates, program calling and multiple nesting of subroutines;

With USB interface;

It supports sending or receiving programs, parameters, system software, system memory data and message recording information in LST text file format

DA98 series digital AC servo or Dy3 series stepping drive device with pulse + direction signal input.