●2 channels, 6 feed axes, 2 analog spindles, 2 encoder feedback, 2 hand pulses

●Zui small control accuracy 0.1 μ m. Zui high moving speed 60m / min

●GS2000T-N series strong overload servo unit is equipped as standard, and 5000 line encoder is used for servo motor position feedback

●Adaptive servo spindle can realize spindle orientation, rigid tapping, cylindrical interpolation and polar interpolation

●Support dual spindle / dual tool holder, single spindle / dual tool holder, dual spindle / single tool holder applications

●Built in PLC, ladder diagram online display and monitoring, expandable serial I / O unit

●It has unique functions such as simple synchronization control, hybrid control, overlap control, inter channel interference detection, waiting for M code and so on

●It has the functions of hand pulse trial cutting, hand pulse interruption and teaching

●It has the functions of online machine tool debugging wizard, auxiliary programming, track preview, macro variable annotation / customization, direct graphic size input, etc

●MDI multi segment execution

●8.4-inch true color LCD, supporting Chinese, English, Russian and other multilingual displays

Number of channels: 2

Number of Zui large control axes: 6 axes

Number of control axes of each channel: 0 ~ 5 axes (parameter setting)

Number of Zui large linkage axes of each channel: 5 axes (linear interpolation), 2 axes (circular interpolation)

Number of PLC control axes: 6 axes

Synchronization control, hybrid control, overlap control, waiting for M code

Inter channel spindle control, inter channel one-way segment program detection, inter channel interference detection, inter channel common memory

Workpiece coordinate system (G50), local coordinate system, workpiece coordinate system 1 ~ 6 (G54 ~ G59)

Position command range: ± 9999999 × Zui small input units

Absolute / incremental programming, diameter / radius programming, imperial / metric conversion, linear axis / rotary axis

It contains 69 g commands, including fast positioning, linear interpolation, arc interpolation, cylindrical interpolation, thread cutting, polar interpolation, rigid tapping, pause, macro program call, jump, cycle, synchronous control, hybrid control, overlap control, etc

Fast moving speed: μ Class (is-b) 0 mm / min ~ 60000 mm / min 0.1 μ Class (is-c) 0 mm / min ~ 24000 mm / min

Fast magnification: F0, 25%, 50%, * four levels of adjustment

Cutting feed rate: μ Class (is-b) 0 mm / min ~ 30000 mm / min 0.1 μ Class (is-c) 0 mm / min ~ 24000 mm / min

Feed rate: 0 ~ 150%, 16 levels of adjustment in total

Rapid movement / cutting feed acceleration and deceleration: linear type. The starting speed, ending speed and acceleration and deceleration time of acceleration and deceleration are set by parameters

Thread type: equal pitch straight thread / tapered thread / end face thread / circular arc thread, variable pitch straight thread / tapered thread / end face thread

Number of thread heads: 1 ~ 99

Thread pitch: 0.01mm ~ 500mm (metric thread) or 0.06 thread / inch ~ 2540 thread / inch (British thread)

Acceleration and deceleration of thread cutting: linear type and exponential type are optional

Thread tailing: tailing length, angle and speed characteristics can be set

Spindle speed: it can be given by s code or PLC signal, and the speed range is 0RPM ~ 9999rpm

Spindle magnification: 50% ~ 120%, 8 levels of adjustment in total

2 channels of 0V ~ 10V analog voltage output, support dual spindle control, flexible tapping / rigid tapping

2-way spindle encoder feedback, and the number of spindle encoder lines can be set

Tool length compensation (* offset): 32 groups / Channel

Tool wear compensation: 32 groups

Tool life management: 32 groups (8 pieces / group)

Tip radius compensation (type C)

Tool setting mode: fixed point tool setting, trial cutting tool setting, back to reference point tool setting, automatic tool
setting, coordinate recording function

Tool deviation execution mode: modify coordinate mode and tool movement mode

Special m codes (M00, M01, M02, M30, M98, M99, M100 ~ M199), and other m codes are defined by PLC

Two level PLC program, Zui more than 5000 steps, and the refresh cycle of level 1 program is 8ms

13 basic commands and 27 functional commands

PLC program online display and monitoring; Support PLC warning and PLC alarm

Support multiple PLC programs, and the currently running PLC program can be selected

Basic I/O: 50 inputs / 42 outputs

Expandable serial I / O unit (optional):IOA-01T: 24 point input, 16 point output, 4-channel analog voltage output

IOA-02T: 40 point input, 24 point output, 8-Channel analog voltage output and 4-channel analog voltage input

Program capacity: 40M, 10000 programs (including subroutines and macro programs)

Editing method: full screen editing

Editing functions: program / program segment / word retrieval, modification and deletion

MDI allows you to input and run 10 program segments

Support macro program / subroutine calling, and allow 4-fold subroutine nesting

Calculator

Auxiliary programming

Trajectory preview, graphic simulation, idle operation, machine tool lock, auxiliary function lock, single-stage operation, hand pulse trial cutting

Fixed cycle, multiple fixed cycle, drilling cycle, rigid tapping, direct input of drawing size, automatic chamfering, statement macro instruction programming

Reverse clearance compensation: 0 mm ~ 2 mm (or 0 inch ~ 0.2 inch). The reverse clearance compensation mode and frequency are set by parameters

Memory pitch error compensation: 1200 compensation points in total, and the number of compensation points of each axis is set

8.4 "true color LCD

Support Chinese, English, Russian and other languages

The machining path is displayed, and the machining path is enlarged and reduced

Position, program, tool compensation, alarm, parameter, setting, graphics, diagnosis, ladder diagram

Operation mode: edit, automatic, input, mechanical zero return, manual pulse / single step, manual, program zero return

Level 6 operation authority management

32 shutdowns

Program switch, parameter switch

Interruption of hand pulse and teaching

Machine tool function debugging

USB: USB disk file operation, direct processing of USB disk files, and support PLC program and system software USB disk upgrade

RS232: bidirectional transmission of part programs, parameters and other files, supporting PLC program update 

Emergency stop, hardware travel limit, software travel check, data backup and recovery

6 control axes (including axis C), 2 analog voltage outputs, 2 encoder feedback inputs, 2 electronic hand pulse inputs (supporting handheld electronic hand pulse), 1 RS232, 1 USB-H, 52 input / 40 output (TTC-H:72 input / 48 output)

GSK 980TTC (W×H×D)

GSK 980TTC-V (W×H×D)

GSK 980TTC-B (W×H×D)

GSK 980TTC-H (W×H×D)

(400×200×130mm)

MPU03C( Operation panel with handwheel)400×200×135mm

MPU03D(Operation panel without handwheel)400×200×135mm