Brand: BENTLY

Type:125840-01

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Description The 3500/15 Power Supply is a half-height module and must be installed in designated slots on the left side of the rack. The 3500 rack can contain one ortwo power supplies with any combinations of AC and DC. Either supply can power a fullrack. When two power supplies are installed in a rack, the one in the lower slot acts as the primary supply, and the otherin the upper slot acts as the backup supply. If installed, the second supply is the backup forthe primary one. Removing orinserting either power supply module does not disrupt operation of the rack as long as a second power supply is installed. The 3500/15 Power Supply accepts a wide range of input voltages and converts them to voltages acceptable for use by other 3500 modules. The following power supplies are available with the 3500 Series Machinery Protection System: n Legacy AC Power n Universal AC Power n High Voltage DC Power Supply n Low Voltage DC Power Supply1: 3500/15 Power Supply OK LED 2: Low Voltage DC Power Input Module

3: High Voltage DC Power Input Module 4: Legacy High Voltage AC Power Input Module 5: Legacy Low Voltage AC Power Input Module 6: Universal AC Voltage Power Input ModuleThis option uses the AC power supply and the Low Voltage AC Power Input Module (PIM). Input voltage 110 Vac nominal 85 to 132 Vac rms 120 to 188 Vac pk Installations using AC Power Input Modules (PIM) prior to Rev. R and AC Power Supply Modules prior to Rev. M require an input voltage of 85 to 125 Vac rms. Input frequency 47 to 63 Hz Universal Voltage AC Description This option uses the universal AC Power Supply and universal AC Power Input Module (PIM). Input Voltage 110 to 220 Vac nominal 85 to 264 Vac rms 120 to 373 Vac pk The universal AC Power Supply and Power Input Module are not compatible with the legacy High Voltage AC or Low Voltage AC units.