Brand: ABB

Type:07KT98 GJR5253100R4278

Origin: the Swiss

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

CAN bus coupler modules (BL 210/B) • EtherCAT bus coupler modules for the connection of remote I/O modules (BL 270/A, BL 270/B, BL 272/A, BL 272/B) • Additionally integrated digital inputs (BL 27x/A) or outputs (BL 27x/B) • Support of remote modules for serial interfaces and fieldbus interfaces (BL 272/A, BL 272/B) • Electronic parameter chip The BL 210/B (CANopen) and the BL 27x/x series are bus coupler modules that, in combination with I/O modules, enable the decentralization and transmission from module islands. The BL 27x/x series is used as a bus coupler between EtherCAT and K-bus. Modules of the system can thereby be operated as remote I/O islands. The BL 27x/x can be connected to a control via EtherCAT and is thereby made an EtherCAT slave. Two variants of the BL27x series are available: - With four additional digital inputs (BL 27x/A) - With four additional digital outputs (BL 27x/B) As a special feature, the BL 272/x enables the connection of interface modules for fieldbuses (FM 200/A) and serial interfaces (SM 210/A, SM 220/A, SM 230/A). This enables the operation of such interfaces remotely from CPU modules. This feature is also referred to as “bus via bus communication”. The status of the module is indicated via a status LED. The LEDs on the RJ45 sockets provide information about the link and activity status of the respective network connection. Each digital input/output also has a status display (active/ not active).

 These modules are attached directly to a CPU module or can be operated with all KEBA controls by means of bus couplers Ethernet interface • 10/100 Mbit/s transmission rate The NX 252/A is an Ethernet PCI module that is directly plugged into a CP-26x-CPU module, thereby expanding this module with an additional RJ45 Ethernet interface. The transmission rate is 10/100 Mbit/s; the states are indicated by means of transmission and reception LEDs. The NX 252/A is equipped with an electronic parameter chip.

Serial interface RS232, RS 422/485-A or Current Loop • Full-duplex operation • High interference immunity