Name: MSM042A1B Panasonic Electronic Have termination style wire leads
Brand: Panasonic
Availability: InStock

Product Details

Brand:	Panasonic	Model:	MSM042A1B
Place Of Origin:	Japan	Type:	AC SERVO MOTOR
Power:	100W	Volatge:	200V
High Light:	ewing machine servo motor,electric servo motor

PANASONIC Industrial SERVO MOTOR MSM042A1B FREE EXPEDITED SHIPPING MSM042A1B

Specifications:

Categories Motors, Solenoids, Driver Boards/Modules

Motors - AC, DC

Manufacturer Panasonic Industrial Automation Sales

Series MINAS A5

Part Status Active

Type AC Motor

Function Servomotor

Motor Type -

Voltage - Rated 200VAC

RPM 3000 RPM

Torque - Rated (oz-in / mNm) 184.1 / 1300

Power - Rated 400W

Encoder Type Incremental

Size / Dimension Square - 2.362" x 2.362" (60.00mm x 60.00mm)

Diameter - Shaft 0.551" (14.00mm)

Length - Shaft and Bearing 1.181" (30.00mm)

Mounting Hole Spacing 2.756" (70.00mm)

Termination Style Wire Leads

Features Key, Oil Seal

Gear Reduction Ratio -

Torque - Max Momentary (oz-in / mNm) 538.1 / 3800

Operating Temperature 0°C ~ 40°C

Approvals CE, CSA, cULus, TUV, UL

Weight 3.1 lbs (1.4kg)

OTHER SUPERIOR PRODUCTS

Yasakawa Motor, Driver SG-	Mitsubishi Motor HC-,HA-
Westinghouse Modules 1C-,5X-	Emerson VE-,KJ-
Honeywell TC-,TK-	GE Modules IC -
Fanuc motor A0-	Yokogawa transmitter EJA-

Introduction:

Ever order a motor on power, speed, and enclosure? PO says maybe "5 hp, 1,800 rpm, TEFC."

New-motor nameplate says "HP 5, RPM 1748, Enclosure TEFC, Des B, Frame 184T, Amps 7.0,

PH 3, HZ 60, Duty Cont, Volts 460, Type P, Amb 40 C, SF 1.15, INS CL F, EFF 82.5, P.F. 80, DE

bearing 35BC02JGG30A26, ODE bearing 3OBC02JGG3OA26."

Should you reject the motor because it is not rated at 1,800 rpm? What does all that extra

information on the nameplate mean? Do you care? The answers are "maybe," "we'll discuss it in

a minute," and "you probably should."

To define the basic performance and mounting parameters of a motor, the National Electrical

Manufacturers Association (NEMA) defines some basic design and dimensional parameters in

NEMA Standard MG 1. These parameters are then coded onto the motor nameplate to give you a

basic definition of what you have received. Manufacturers often include additional information to

further define some key motor features.

Section MG 1-10.40, "Nameplate Marking for Medium Single-Phase and Polyphase Induction

Motors," of the NEMA standard requires that "The following minimum amount of information shall

be given on all nameplates of single-phase and polyphase induction motors. For abbreviations,

see MG 1-1.80."

* Manufacturer's type and frame designation

* Horsepower output.

* Time rating. (See MG 1-10.36.)

* Maximum ambient temperature for which motor is designed. (See Note I of MG 1-12.43.)

* Insulation system designation.

* RPM at rated load.

* Frequency.

* Number of phases.

* Rated load current.

* Voltage.

* Code letter for locked rotor kVA. (See MG 1-10.37.)

* Design letter for medium motors. (See MG 1-1.16.)

* NEMA nominal efficiency when required by MG 1- 12.55

* Service factor if other than 1.0.