Best Quality Rotary Dryer Machine

The rotary dryer is a large-scale drying equipment that is energy efficient and saving. Mainly used for drying various materials or granular materials such as metallurgy, building materials, food, light industry, chemical, coal, pharmaceutical and mineral industries.

The single cylinder dryer has strong adaptability to materials, and rotary dryer has higher dryness than the air dryer. It can dry materials from 60% to 80%, helping you get the job done quickly.

 

 

Application of dryer Machine

1. Chemical, mining, metallurgical and other industries, such as ore, slag, coal, metal powder, clay, earth, kaolin.

2, agriculture, feed, fertilizer industry, such as straw, grass, sawdust, leaves, fish meal, corn, rice, wheat, corn, soy sauce, starch residue, distiller's grains, medical, soy sauce residue, peat, organic compound Fertilizer, sludge, aquatic waste, food waste, abattoir waste, organic fertilizer, inorganic fertilizer, ammonium phosphate.

3. Drying of powdered and granular materials with special requirements. Such as various crystals, light calcium carbonate, activated clay, magnetic powder, graphite, inorganic mud, clay, lime slurry, ore mud, phosphorus slag, aluminum red mud.

4. Low temperature drying is required and a large amount of continuous drying material is required.

 

Working Principle of Rotary Dryer Machine

1. Feed the material from the conveyor or the bucket elevator to the hopper, the material is added from the higher end, and the heat carrier and the material flow into the cylinder together. As the cylinder rotates, the material moves to the lower end by gravity. 

During the forward movement of the wet material in the cylinder, the heat of the heat carrier is directly or indirectly obtained, so that the wet material is dried, and then sent out at the discharge end by a belt conveyor or a screw conveyor.
2. A lifting plate is arranged on the inner wall of the drum dryer cylinder, and its function is to raise and sprinkle the material, so that the contact surface of the material and the airflow is increased to increase the drying rate and promote the advancement of the material.

After the heat carrier passes through the dryer, a cyclone is generally required to collect the materials contained in the gas (the heat carrier is generally classified into hot air, flue gas, etc.). If you want to further reduce the dust content of the exhaust gas, you should also discharge it after passing the bag filter or the wet dust collector.

 Specification of Rotary Dryer Machine

Specification	Capacity(T/H)	Motor(KW)		Reducer Rate		Weight (T)
Φ1x10	1.0-3.5	Y132M-6	5.5	ZL350-II-25	31.5	7.5
Φ1.2x10	2.5	Y160M-6	7.5	ZL50-16-1	31.5	13.5
Φ1.5x12	3.3-4.9	180L-6	15	JZQ500-III-2F	31.5	18.9
Φ1.5x15	4-6	Y200L-6	18.5	JZQ600-III-2F	31.5	21
Φ1.8x12	4-6	Y160L-6	18.5	ZQ50-16II-2	31.5	22.83
Φ2.2x12	7-12	Y200L-6	22	JZQ650-III	31.5	37.6
Φ2.2x14	7-12	Y200L-6	22	JZQ650-III	31.5	40
Φ2.2x16	12	Y225M-6	22	JZQ750-III	31.5	45
Φ2.4x14	12	Y250M-6	37	JZQ750-III	31.5	51
Φ2.4x18	10-13	Y250M-6	37	ZL85-13-1	27.16	54
Φ2.4x20	10-14	Y250M-6	37	ZL85-13-1	27.16	54.14
Φ3x20	25	Y280M-6	55	ZL100-16-1	41.52	78
Φ3x25	32-36	YR280M-6	75	ZL100-16-1	41.52	104.9

 

Features of Rotary Dryer Machine

 

Stock of Rotary Dryer Machine