FRP cooling tower, buy Small Industrial Round & Square FRP Cooling Tower 10T 80T 150T on China Suppliers Mobile

Product Details

Product Description

1. Cooling towers are generally available in thermal power plants.After the water is heated, the steam turbine is driven by
high-pressure gas, and the remaining gas needs to be cooled.
2. The central air conditioner also has the function of cooling tower to cool the circulating liquid.
3. There are also professional production of FRP cooling towers, commonly known as cooling water tower, cold water tower, cold water tower, glass tower, water tower, etc., mainly square, round, cross-flow, counter-flow, no filler spray cooling tower series.

Working principal:

1. Working fluid (water,oil o other liquid) flowing inside of the coils,which is enwrapped by spray water on the outside.The
heat of water is transferred by coil and become the saturated vapor when meet the water and air.
2. The heat is exhausted out of the tower by the tower by the top fan; water is collected back to the bottom tank and circulates continuously.The spray water is cooled down via PVC radiation fin in the process of circulation,and flow is the same direction with the fresh wind.The coil mainly takes sensible heat travel style.
3. The most benefit of this style is can avoid scale formation on the outside of the coil.And this will apply especially to
dealing with hightemperature fluid (e.g.60*C) or the fluid need big temperature difference (e.g.60*C to 32.C).

Features of FRP cooling tower:

1. Good shape with small outside size, light weight;
2. Optimum structure;
3. The cooling tower body is made of FRP, which is anti-aging, anti-corrosion, without fading and distortion;
4. Min. Noise: The lowest noise blower and unique noise elimination technology is adopted to reduce the noise to a minimum level;
5. With reliable operation: All steel structure brackets are galvanized and corrosion resistant;
6. The usage life is twice longer compared with similar products;
7. The casing and water plate of the cooling tower are made of fiberglass, which will not be corroded, and no painting is needed.
They can be used for a long time with very low maintenance cost;
8. The angles of all fans are regulative and axial-flow, which made of advanced engineering plastics;
9. All the motors are sealed, which can be used in the severe weather and circumstances

Detail introduction

1. Tower Body: Reasonable shape, steady air flow, high-quality material, bright color, anti-aging, high strength, light weight,
corrosion resistant. The down tower body can be equipped with the spilled water, sewage and automatic feed pipe according to the order request. It can absorbent water directly from here so the cooling pool is not needed. In addition, it is equippedwith the silencing mat to reduce the noise effectively.
2. Filler: Adopts to the PVC wave plate, Increased lateral convex rib so it can enhance the redistribution capacity of the water, low resistance, the thermal performance is good, the adaptive temperature range is -50--70.
3. Water Distributor and water pipe.Equipped with the stainless steel ball bearing, operation flexible and reliable. uniform
water distribution. The material of water pipe is FRP and the closed water board is installed in the pipe to overcome the
phenomenon of floating water. By the way, you can also choose the spray type water distribution system.
4. Fan: Low noise and high efficiency fan. The blade of fan is plate airfoil type (aluminum alloy,steel,FRP )
5. Motor: Specially designed for the cooling tower. Low noise, saving energy,waterproof properties is good, waterproof properties is good and high efficiency.
6. Reduction Gear: Adopts to the polyester fiber reinforced neoprene belt transmission, high temperature resistant, high
efficiency, low noise, don't stretch in the water so it can overcome the skid phenomenon, or the gear box connect with the
motor together.(depend on the model)
7. Noise Elimination Device:Ultra low noise type cooling tower increase the sound absorption material outside the air intake, also equipped with the sound absorption grating in the tower body in order to achieve maximum noise reduction effect. There is shielding and absorption material trumpet sound absorption grating in the upper tower body air outlet to reduce the noise or the fan and motor.
8. Wind Inlet Window: Equipped with the FRP louver blade, Air resistance is small, so it is suitable for the northern region and the place that need to the cooling tower all year around.

9.Support Frame: All the steel frame are assembly type. The surface of support frame is galvanized and paint anti-corrosion.
The fastener are all adopt hot dip galvanized steel.

Packing & Delivery

Company Profile

Hengshui Aoliande Trade Co., Ltd. is professional company which to market & sell FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 50+ staff, annual sales of glass fiber reinforced plastic series products achieved 5,000,000 USD, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt etc, and won the support and trust from new & old customers. Major products: FRP vessel and chemical equipment in sets; FRP high, medium & low pressure pipe FRP septic tank FRP molded & pultrused products Electrolytic cell S/F, F/F oli storage tank FRP prodcution machines Hengshui Aoliande Trade Co., Ltd. not only have ability to sell & supply products, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation, installation supervision etc service. Main application: Urban water supply and drainage Desalination of sea water Chemical industry Metallurygy Electric power Oil storing Sewage treatment Building Municipal works Highway facilities

Our customers and certificates

FAQ

1. Q: Are you Trading Company or Manufacturing Factory?

A: We are both manufacturer and trading company. We have our own factory for almost 10 years, and we have better service of overseas customers. Welcome to send your inquiry!

2. Q: How about the Delivery time?

A: Normally, 10-15 days to finish the order for a 20ft container. Welcome to ask for the detailed delivery time according to your order quantity!

3. Q: How can you guarantee the product quality?

A: We have the quality control system ISO9001:2015, and it's been followed strictly. We also have the professional QC team, and each our package worker will be in charge of the final inspection according to the QC instruction before packing.

4. Q: What is about the payment terms.

A: Basically, the payment terms are paypal, T/T, L/C at sight. Western Union, Alipay.

5. Q: Can you do OEM for me?

A: We accept all OEM orders, just contact us and give me your design,we will offer you a reasonable price ASAP.