FRP cooling tower, buy Factory Direct FRP Industrial Counter Cooling Tower 10T 20T 40T 60T 80T on China Suppliers Mobile

Product Details

Product Description

A cooling tower is a device that cools water.Water in its flow with the air for heat exchange, mass exchange, resulting in a drop in water temperature.
The closed cooling tower USES water and coils to transfer heat through the wall of the pipe to transfer the heat of the cooling medium in the coils to reach the cooling purpose.Closed cooling tower of circulating water in the cooling tower inner loop only contact with the air heat exchange cooling coil again take plate heat pipe working medium, the filling water pipe hydrating properly, compared to the open type cooling tower, the most obvious characteristics of closed cooling tower is to increase the coil, in need of cooling liquid working medium flow in the steel plate of tube is not direct contact with water, through the wall heat transfer.

FRP Round Counter flow Water Cooling Industrial Tower
The water flow range: 6m3/h - 1250 m3/h
Cooling water temperature range: 85~30C
FRP cooling tower: anti-corrosion, light-weight, small size, attractive and durable. Convenience to transport, install and
maintain. Especially applicable to air conditioning, refrigeration, air compressor station, heating furnace, and condensation
process and other cooling water circulation system.

Characteristics

1. Space saving and lightweight structure
The high-efficiency heat exchange filler specially designed for this series of cooling towers is adopted, and its heat exchange area increases substantially, which is similar to the original HBLD series and the original HBLCD series, and its occupation area
decreases substantially. Because of the optimization of structural design and the adoption of steel structure, the operating weight is also greatly reduced.
2. Save electricity
The airfoil-type fiberglass high-efficiency fan specially designed by tsinghua university for cooling tower and packing with small ventilation resistance is adopted to reduce the power of the motor used. The motor power of the ultra-low noise type is smaller and more power-saving, and the double-speed motor can be used to save power according to the requirements of users.
3. Low running noise
The low noise axial flow fan made of FRP material designed by tsinghua university for cooling tower and the low noise motor designed for cooling tower are used to reduce the running noise of cooling tower.The running noise of ultra-low noise series cooling tower is lower, which meets the requirement of environmental protection.If equipped with A two-speed motor, it can reduce the noise by 2-3db (A) when running at low speed at night. If the user needs A two-speed motor, he/she should put forward A
request separately when ordering.
4, Excellent corrosion resistance
The tower body, water tank and panel are all made of FRP material with excellent corrosion resistance, and the gel coat natural resin is added with light stabilizer, which has excellent aging resistance and does not change color for a long time.The steel structure of the tower body is galvanized after processing to increase the corrosion resistance of the cooling tower.
5. Convenient combination
The combination can be used to satisfy the requirements of different working conditions. Users can also vote on the combination according to the site conditions, and can adjust the appearance of the cooling tower according to the characteristics of the users' archway.If user space is very limited.Our company can also design according to the special requirements of users and satisfy the requirements of thermal performance and noise.
6. Convenient protection
This series of cooling tower is designed as a combination, the adjacent cooling tower air Chambers are separated from each other, under the premise of normal operation of the cooling tower, the implementation of protection maintenance, cleaning filler, water
pipe and water tank office more convenient.

Details fotos

Tower Body: Reasonable shape, steady air flow, high-quality material, bright color, anti-aging, high strength, light weight, corrosion resistant.
The down tower body can be equipped with the spilled water, sewage and automatic feed pipe according to the order request. It can absorbent water directly from here so the cooling pool is not needed. In addition, it is equipped with the silencing mat to reduce the noise effectively.
Filler: Adopts to the PVC wave plate, Increased lateral convex rib so it can enhance the redistribution capacity of the water, low resistance, the thermal performance is good, the adaptive temperature range is -50--70.
Water Distributor and water pipe: Equipped with the stainless steel ball bearing, operation flexible and reliable. uniform water distribution.
The material of water pipe is FRP and the closed water board is installed in the pipe to overcome the phenomenon of floating water.
By the way, you can also choose the spray type water distribution system.
Fan: Low noise and high efficiency fan. The blade of fan is plate airfoil type (aluminum alloy,steel,FRP )
Motor: Specially designed for the cooling tower. Low noise, saving energy,waterproof properties is good, waterproof properties is good and high efficiency.
Reduction Gear: Adopts to the polyester fiber reinforced neoprene belt transmission, high temperature resistant, high efficiency, low noise, don't stretch in the water so it can overcome the skid phenomenon, or the gear box connect with the motor together.(depend on the
model)
Noise Elimination Device: Ultra low noise type cooling tower increase the sound absorption material outside the air intake, also equipped with the sound absorption grating in the tower body in order to achieve maximum noise reduction effect. There is shielding and absorption material trumpet sound absorption grating in the upper tower body air outlet to reduce the noise of the fan and motor.
Wind Inlet Window: Equipped with the FRP louver blade, Air resistance is small, so it is suitable for the northern region and the place that need to the cooling tower all year around.
Support Frame: All the steel frame are assembly type. The surface of support frame is galvanized and paint anti-corrosion.
The fastener are all adopt hot dip galvanized steel.

Packing & Delivery

Company Profile

Hengshui Aoliande Trade Co., Ltd. is professional company which to market & sell FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 50+ staff, annual sales of glass fiber reinforced plastic series products achieved 5,000,000 USD, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt etc, and won the support and trust from new & old customers. Major products: FRP vessel and chemical equipment in sets; FRP high, medium & low pressure pipe FRP septic tank FRP molded & pultrused products Electrolytic cell S/F, F/F oli storage tank Whole set of FRP prodcution machines Hengshui Aoliande Trade Co., Ltd. not only have ability to sell & supply products, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation, installation supervision etc service. Main application: Urban water supply and drainage Desalination of sea water Chemical industry Metallurygy Brewing Electric power Oil storing Sewage treatment Building Municipal works Highway facilities

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory. In our group, we have trading company Aoliande (ALD) Trading and professional FRP plant Jiubo Composites.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us.