Internal Combustion Engine Oil Of Oxidation Stability Tester
Product Model: JF0299
Instrument introduction
This instrument is suitable for testing the oxidation stability of internal combustion engine oil. During the test, the sample is oxidized under specified conditions, and the mass change of the metal flakes in the sample before and after the oxidation, the change of kinematic viscosity at 50°C, the pentane insoluble matter after oxidation and the acidity and alkalinity of the sample vapor are used to score the total score. Indicates the oxidation stability of the sample. The lower the total score, the better the oxidation stability.
Product parameter
1. Applicable standard: SH/T0299
2. Temperature control method: imported PID digital display thermostat
3. Temperature control degree: normal temperature~165±0.1℃
4. Heating method: metal bath heating
5. Power of the whole machine: 1.5KW
6. Working unit: 3 tubes
7. Flow control: * dense flowmeter
8. Power supply: AC220V/50Hz
9. Timing method: digital display timer
Features
1. The instrument is a desktop, including a flow meter for heating bath. There is a hole in the stainless steel lid, which can be put into the sample bottle;
2. Stainless steel structure with ceramic coating;
3. Environment-friendly metal bath heating, reducing the harm of oil fume to the human body, and efficient thermal insulation effect;
4. Stainless steel heater;
5. Flow meter with needle valve, flow rate 0~200mll/min;
6. Air filter with glass wool;
7. Micro-processing thermostat and PID control, digital display temperature, maximum 0.1℃, Pt100 RTD temperature probe;
8. Operating temperature range: room temperature~200°C; safety measures to prevent overheating or low liquid level;