Inconel Alloy, buy inconel 625 no6625 alloy 625 weld wire on China Suppliers Mobile

Product Details

Product categories

Product Details

Inconel 625 Inconel625 is a kind of alloy grades, density of 8.4 g/cm3, melting point of 1290-1350, excellent corrosion resistant to inorganic acid, the oxidation and reduction environment of all kinds of corrosive medium has excellent corrosion resistance of 625 alloy in many medium showed excellent corrosion resistance in chloride medium have excellent intergranular corrosion and crevice corrosion pitting erosion performance.

Application:The softened annealed low carbon alloy 625 is widely used in the chemical process industry. Its good corrosion resistance and high strength make it a thinner structural component. 625 alloy can be used in contact with seawater and under high mechanical stress.Typical application areas:

●Components of a chlorinated organic chemical process, especially where acid chloride catalysts are used

● Digesters and bleach pools used in the pulp and paper industry

●Absorption tower reheater flue gas inlet baffle fan (wet) stirrer guide plate and flue duct in flue gas desulfurization system

●Used to manufacture equipment and components for use in acidic gas environments

●Acetic acid and acetic anhydride reaction generator

●Sulfuric acid condenser

Has the following properties:
● It has excellent corrosion resistance to all kinds of corrosive media in oxidizing and reducing environment
●Excellent resistance to spot and crevice corrosion, and no stress corrosion cracking due to chloride
●Excellent resistance to inorganic acids, such as nitric acid, phosphoric acid, hydrochloric acid, sulfuric acid and hydrochloric acid mixture, etc
● Excellent corrosion resistance to a variety of inorganic acid mixed solutions
● When the temperature is up to 40, it shows good corrosion resistance in various concentrations of hydrochloric acid solution

●Good machining and weldability, no post-weld cracking sensitivity

●Certified for manufacture of pressure vessels with wall temperatures between -196 and 450

●Certified by the American Society of Corrosion Engineers NACE Standard (MR-01-75) to meet the highest standard class VII for use in acidic gas environments

Product name	inconel 625 no6625 alloy 625 weld wire
Grade	inconel 725 601 600 625 601 718
Standard	AISI,ASTM,DIN,JIS,BS,NB
Origin	Tisco, baosteel, jiusteel and so on
Specification	Wire: 0.01-10mm Strip: 0.055.0-5.0250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm Or Customized
Chemcial Composition (%)	Ni:58min,Cr:20.0-30.0,Mo:8.0-10.0,Nb:3.15-4.15,Fe:5.0max,C:0.1max,M:0.5max, Si:0.5max,S:0.015max,Al:0.4max,Ti:0.4max,P:0.015max,Co:1.0max
Density	8.44g/cm3
Melting point	1290-1350℃
Package	clients' requirement and Standard export sea-worthy packing
Delivery time	5-15 days subject to the clients' requirement and quantity

Surface finish	Characteristics & Application
NO.1	Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices.
NO.2D	Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, build ing materrials and pipings.
NO.2B	The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses.
NO.3	Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc.
NO.4	Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc.
HL	Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc.
BA	Cold rolled, bright an nealed and skin passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc.

packing

Company Profile

Workshop

F A Q

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.