Inconel Alloy, buy EN-DIN NiCr23Co12Mo nickel alloy inconel 617 bar price per kg on China Suppliers Mobile

Product Details

Product categories

Product Details

Inconel617 has excellent resistance to intercrystalline corrosion and intercrystalline stress corrosion cracking. The heat transfer materials for PWR steam generators have undergone a development process including 304 austenitic stainless steel, 600 alloy, 800 alloy and 690 alloy. The study of corrosion failure in service of 600 alloy shows that intergranular corrosion and intergranular stress corrosion cracking are the main problems. The 690 alloy has been used as the heat pipe material for steam generator of PWR nuclear power plant.

Application:1. Components of a chlorinated organic chemical process, especially where an acid chloride catalyst is used
2 Digesters and bleach tanks used in the pulp and paper industry

3. Absorption tower reheater flue gas inlet baffle fan (wet) stirrer guide plate and flue pipe in flue gas desulfurization system

4. Used to manufacture equipment and components for use in acidic gas environments

5.Acetic acid and acetic anhydride reaction generator

6.Sulfuric acid condensing

Product name	EN-DIN NiCr23Co12Mo nickel alloy inconel 617 bar price per kg
Grade	inconel 725 601 600 625 601 718
Standard	AISI,ASTM,DIN,JIS,BS,NB
Origin	Tisco, baosteel, jiusteel and so on
Specification	Wire: 0.01-10mm Strip: 0.055.0-5.0250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Chemcial Composition (%)	Ni:44.5min,Cr:20.0-24.0,Co:10.0-15.0,Mo:8.0-10.0,Al:0.8-1.5,Ti:0.6max,C:0.05-0.15, Fe:3.0max,Mn:1.0max,Si:1.0max,S:0.015max,Cu:0.5max,B:0.006max
Density	8.36g/cm3
Package	clients' requirement and Standard export sea-worthy packing
Delivery time	5-15 days subject to the clients' requirement and quantity

Surface finish	Characteristics & Application
NO.1	Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices.
NO.2D	Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, build ing materrials and pipings.
NO.2B	The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses.
NO.3	Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc.
NO.4	Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc.
HL	Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc.
BA	Cold rolled, bright an nealed and skin passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc.

packing

Company Profile

Workshop

F A Q

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.