Inconel Alloy, buy Inconel Incoloy 800 800H 800HT 825 840 901 925 926 A286 Sheet Plate on China Suppliers Mobile

Product Details

Product Description

Product Name	Inconel Incoloy 800 800H 800HT 825 840 901 925 926 A286 Sheet Plate
Material Grade	Inconel 800 800H 800HT 825 840 901 925 926 A286
Nearly Brand	*800:* DIN 1.4876, UNS N08800, ASTM B409, JIS NCF800, 0Cr20Ni32AlTi
		*800H:* UNS N08810, DIN 1.4958, ASTM B409, 1Cr20Ni32AlTi
		*800HT:* DIN 1.4876, UNS N08811, FeNi32Cr21AlTi(ISO)
		825: UNS N08825, DIN 2.4858, GB NS142, NiCr21Mo
		*840:* UNS S33400
		*901:* UNS N09901, DIN 2.4662, GGH901, Nimonic 901
		*925:* UNS N09925/N08925
		926: UNS N08926, DIN 1.4529
		*A-826:* UNS S66286, GH2132
Specification	Width: 500~1500mm, Thickness: 0.2~8.0mm, Length: 1200~6000mm
Type	Small/Large/Regular/Customized Size
*Payment Term	By T/T, 50% down payment, 50% balance before shipment.

800 alloys typically contain 15 to 25 percent Cr, 30 to 45 percent nickel, and small amounts of aluminum and titanium. After high temperature and fast cooling, all 800 alloys are in austenite single zone. Therefore, the service state is single austenite structure. The alloy has high chromium content and sufficient nickel content, so it has high high temperature corrosion resistance.

In chloride, low concentration NaOH solution and high temperature and high pressure water, it has excellent stress corrosion cracking resistance, so it is used for manufacturing stress corrosion cracking resistance equipment.

Corrosion of Incoloy 800h ability a lot of corrosion medium.Its high content of nickel in the aqueous corrosion condition has the very good resistance to stress corrosion cracking performance.For a face-centered cubic lattice structure.Very low carbon content

and improve the Ti: C ratio increased the stability of the structure and the largest sensitization resistance and resistance to intergranular corrosion.

Incoloy 825 is a titanium stabilized all-austenitic nife chromium alloy with addition of copper and molybdenum. Coloy 825 is a universal engineering alloy that has acid and alkali corrosion resistance in both oxidation and reduction environments.

Incoloy 901 alloy has high yield strength and endurance strength under 650℃, good oxidation resistance under 760℃ and long-term stability.It is widely used in manufacturing rotary parts (turbine disc, compressor disc, journal, etc.), static structure parts, turbine outer ring and fasteners of aviation and ground gas turbine engines working below 650℃.

Incoloy 925 is a time to strengthen the iron nickel base alloy, because of the alloy of chromium, molybdenum, copper composite effect, make the Incoloy925 alloy has excellent corrosion resistant ability of reducing chemical medium, and good resistance to pitting of crevice corrosion performance, the alloy of nickel content enough to ensure the resistance to chlorine ion caused
stress corrosion, it is mainly used for high strength and corrosion resistance of the field.

Incoloy 926 is an austenitic stainless steel alloy.The nitrogen content is 0.2% and the molybdenum content is 6.5%.Molybdenum and nitrogen content greatly increase the resistance to crevice corrosion.At the same time, nickel and nitrogen can not only improve
the stability, but also reduce the tendency to separate the crystalline thermal process or welding process of nickel alloys with higher nitrogen content.

Incoloy 800HT is resistant to many corrosive media. Its high nickel content makes it have good resistance to stress corrosion cracking in water corrosion conditions. High chromium content makes it more resistant to pitting corrosion and crack corrosion cracking. The alloy has good resistance to nitric acid and organic acid, but limited resistance to sulfuric acid and hydrochloric acid. In addition to the possibility of spot corrosion in halides, excellent corrosion resistance is found in oxidized and non-oxidized salts. It is also very resistant to corrosion in water, steam and a mixture of steam, air and carbon dioxide. Used in nitric acid condenser - corrosion resistance to nitric acid, steam heating tube - good mechanical properties, heating element tube- good mechanical properties, etc. For applications up to 5℃, the alloy supply state is annealed.

Incoloy A-286 is fe-25ni-15cr high temperature alloy, which is enriched with molybdenum, titanium, aluminum, vanadium and trace boron.Under 650℃, it has high yield strength, durability, creep strength, good plasticity and satisfactory welding performance. Suitable for manufacturing high-temperature bearing parts of aero engine that work under 650℃ for a long time, such as turbine disc, press disc, rotor blade and fastener, etc.The alloy can produce deformed products of various shapes, such as plates, forgings, plates, rods, wires and rings.Coloya-286 nickel based alloy improves the purity of the alloy, limits the gas content, controls the low melting point element content, and adjusts the heat treatment system, thereby improving the thermal strength and long-term performance of the alloy.

*Storage: Pay attention to moisture, dust, oil, lubricating oil, as well as surface rust, or poor welding corrosion resistance.When water is immersed between the film and the steel substrate, the corrosion rate is faster than that without the film.Warehouse storage should be placed in a clean, dry and easy to open the air, to maintain the original packaging state, the stainless steel film should avoid direct light, film should be periodic inspection, if the film deterioration (film life of 6 months) should be replaced immediately, if the packing material when pad paper, in order to prevent surface corrosion should be
immediately removed pad paper.

Our Service

Custom service
Metal element	Can add a certain metal element, according to customer requirements for metal element content adjustment
Specification	Regular size, large size, small size
Surface	No.1, No.2D, No.2B, No.3, No.4, #320, HLNo.4, BA
Hardness	Super soft, soft, semi-soft, low hardness, hard
Technology	Hot rolling, cold drawing, normalizing, annealing, high temperature tempering, solid solution treatment
Edge state	Yes or no trimming

After-sales service

Within 7 days after the customer receives the goods, can return or replace the goods and claim for compensation if there are quality problems. And the freight shall be borne by our company.
*Returns and exchanges are not acceptable undder the following circumstances:
1. Non-pruduct quality problems.
2. The product purchased cannot be used due to the customer's fault (please inform the purpose and other details of the product when you inquiring).
3. Product quality problems caused by natural disasters and other force majeure factors in transit.
4. Due to the customer transport, storage and other improper resulting in product quality problems.