Constant Temperature and Humidity Box for Electronic Products
Testing Requirement
In the electronic products industry, the state has requirements for products, and the same is true for the use of enterprises. So how can we check the quality of electronic products? Haotian constant temperature and humidity test box can help solve the problem.
(1) There should be enough capacity in the laboratory of constant temperature and humidity test box to ensure that each sample of electronic products can be in the same environmental conditions and that the electronic products do not interfere with the test conditions; in order to make the test conditions in the laboratory simulate the actual conditions of use, the volume of the test box should be no less than 5:1, and the temperature and humidity requirements of electronic products should be strict, such as For motors and transformers, the volume between the studio and electronic products should be no less than 10:1.
(2) The studio should ensure the accuracy of environmental parameters during the test period, and appraise them regularly or before and after each test.
(3) The heat source of the studio should be located so that the radiation heat should not fall directly on the electronic products.
Product Usage
The constant temperature and humidity test box for electronic products is a device that can do constant temperature and humidity test. The equipment can provide a stable temperature and humidity environment, similar to the temperature and humidity in the real environment. The constant temperature and humidity test box can also simulate various climatic conditions, especially suitable for stability and long-term test of industrial samples. Such as computer hardware and software, electronic products, communication equipment, optical equipment, hardware and electrical, analytical instruments, surveying and mapping instruments, office equipment, teaching experimental equipment, metal materials, chemical raw materials, printing ink and printing materials and other finished or semi-finished products can buy this equipment to do experiments or experiments.
Quality Inspection
Our company is equipped with special testing equipment,has a skilled quality testing team and a perfect quality control system to ensure the quality of products. Manufacturing’s mission is to all take the customer demand as the guidance, to provide customers the best products, with superior quality and highly responsible work enthusiasm to gain customers trust and support, and create profit for the company to lay the foundation, set up start flowing a powerful operating conditions, the factory all my colleagues must comply with the quality policy and quality objectives to carry out the execution, and on the basis of the above quality commitment, in line with the continuous improvement to establish quality management requirements.
Product Specification
Model | SMC-80PF | SMC-100PF | SMC-150PF | SMC-225PF | |
Temperature series | A:0℃~+150℃, B:-20℃~+150℃, C: -40℃~+150℃, D: -70℃~+150℃. | ||||
Size | Internal chamber size(cm) | 40x40x50(W*D*H) | 50x40x50(W*H*D) | 50x50x60(W*D*H) | 50x60x75(W*D*H) |
External chamber size(cm) | 67x112x151(W*D*) | 72x112x151(W*D*H) | 77x122x161(W*D*H) | 77x131x180(W*D*H) | |
Performance | Temperature range | -40℃~+150℃ | |||
Humidity range | 10%~98%RH | ||||
Indication resolution | 0.01℃, 0.1%RH | ||||
Deviation | ±1.0℃, ±2.5%RH | ||||
Heat up time | About 30min from+20℃ to +150℃ | ||||
Cooling time | +20℃ ~ -20℃≦30min | +20℃ ~ -40℃≦55min | +20℃ ~ -70℃≦75min | ||
Materials | Structural material | External: Anti-rust treatment cold rolled steel plate spraying; Internal: SUS#304/316 steel stainless. | |||
Insulating material | Rigid polyurethane foam with flame retardant. | ||||
Refrigerate system | Refrigerating material | France Tecumseh compressor +Finned type all copper evaporator + air cooled condenser. | |||
Cooling agent | R404A, R23(The United States Dupont HFC series environmental refrigerant.) | ||||
Compressor refrigerating capacity | 1.5P | 1.5P | 1.5P | 3P | |
Controller | Import TEMI series 7” touch screen temperature humidity instrument. | ||||
Electronic apparatus element | The France Schneider industrial control products. | ||||
Customized | All sizes and testing requirements can custom from you. |