Shandong Zhucheng Yihai Environmental Protection Technology Co., Ltd., is a professional engaged in: domestic sewage treatment, slaughtering and aquaculture sewage treatment, food processing and industrial sewage treatment, reclaimed water reuse, waste incinerator and other equipment production, sales, 

As well as a variety of sewage treatment engineering design, construction, installation, commissioning, technical consulting services in one of the professional environmental protection technology company. 

Our company adhering to the "integrity-based, quality first" business philosophy, to customers solemnly Chen Nuo: our company has a professional after-sales service management department, to give a satisfactory reply within 24 hours, and regular telephone return visits and follow-up service, 

Open a wide range of convenient doors for customers. 

Product presentation: 

Introduction: 

Refuse incinerator. 

1. Introduction of main systems of incinerator. 

The whole treatment system consists of the following parts: combustion supporting system, incineration system, dust collector system and electronic control system. 

2. Feeding mode of incinerator. 

Because the incinerator is specially made, the manual feeding method is adopted. 

Manually put animal carcasses in an incinerator. 

To be on the safe side, the feeding should be carried out when the fire is weak. 

The feed port is equipped with an operation platform to facilitate the operation and maintenance of feeding materials. 

3. Combustion supporting system of incinerator. 

The main equipment of combustion supporting system is gas burner. 

The function of the combustion supporting system is to ignite the furnace and incinerate the auxiliary material (when the calorific value of the material is low, it can not maintain its own combustion). 

Natural gas fuel and air are mixed in the burner combustion head and the combustion parameters obtained by adjusting the combustion air and the combustion head can be adjusted, and the combustion gas can be recycled in the combustion head to enable pollutants. 

In particular, the emission of nitrogen oxide (NOx) has been reduced to *. 

It has the functions of automatic management of combustion program, flame detection, automatic judgment and fault prompt, etc. 

The burner can carry out automatic ignition under the control of the program controller. 

The burner has the functions of automatic ignition, fire extinguishing protection, fault alarm, high flame intensity, stable combustion, good safety, large power adjustment and so on. 

The burner can manually adjust the air flow rate to change the flame size; built-in pressure regulating valve to ensure the outlet pressure stability; at the same time, it can also adjust the gas volume by adjusting the gas supply pressure.