Characteristics of [electrolytic capacitor intermittent test system]
1. A testing system for detecting the intermittent state of a capacitor (the intermittent state is divided into instantaneous open circuit and instantaneous short circuit, and the instantaneous time must be longer than 0.5ms to determine the intermittent state);
2. Select the FPGA programmable controller high-speed AD module mode to collect, analyze and judge each channel;
3. Using AC / DC voltage superposition mode to measure the intermittent delay time of the capacitor;
4. Can show which channel short circuit, uses the red indication prompt, and automatically records the channel short circuit number and the corresponding time which occurs;
5. Which channels can be displayed, using yellow indication prompts, and from the The number of open paths and the corresponding time of occurrence of the dynamic recording channel;
6. Measurable delay time in short or open circuit;
7. Reset (RESET) function.
Introduction to [electrolytic capacitor intermittent test system]
The intermittent testing system of 8012A-100V/ 1000uF capacitor is a 12-channel test system that detects the intermittent state of large capacity capacitors. The intermittent state is divided into instantaneous open circuit and instantaneous short circuit. The instantaneous time must be longer than 0.5ms before it can be judged as intermittent state, and its maximum capacity is 1000uF; This system selects the FPGA programmable controller high-speed AD module mode to collect, analyze and judge each channel, through the AC / DC voltage superposition mode to carry on the measurement to the capacitor, each channel works independently. The interval time of each channel can be measured and recorded; Place The parameters and the working state of the instrument are displayed and set on the 10-inch color touch screen (TK6102iH) in Taiwan. The user-friendly interface is easy to operate.
Technical parameters of [electrolytic capacitor intermittent test system]
(non-standard customizable)
input characteristics
1. Input voltage: AC 220V-10%
2. Input frequency: 50Hz/ 60Hz
3. Working environment: temperature:10 ℃ ~ 30 ℃, humidity:75% RH
4. Power supply fuse 6 A
5. Equipment height: approx.1 20 cm
6. Color:Huawei grey
technical specifications
1. Measurement capacity range: 0.1uF~1000uF
2. Input bias voltage: 2.5Vdc~100Vdc
3. Measurement channel: 12 channels
4. Bias voltage display accuracy (V): ±2% ±3 words
5. Delay time: 0.5ms ±10%
6. Parameters and status display: 10-inch color touch screen (TK6102)
7. Measurement system: FPGA
8. Function:
(1) what channels can be short-circuited, indicated in red, and automatically recorded for channel shorting times (up to five);
(2) Channel open, using yellow indication prompt, and automatically record the number of open channels (up to five);
(3) can measure the delay time in short circuit or open circuit;
(4) reset (RESTET) function;
9. Protection function: overcurrent, over-voltage protection function
Maintenance and regular maintenance of [electrolytic capacitor intermittent test system]
Maintenance:
In order to prevent electrical shock, please do not lift the lid of the instrument. All parts in this instrument need not be maintained by the user. If the instrument is abnormal, please seek maintenance from our laboratory. The attached circuit and block diagram are for reference only.
Regular maintenance:
The AC power supply, input power cord accessories and so on must be carefully checked and checked at least once a year to protect the safety of the user and the accuracy of the instrument.
..
For more information about products, please contact us and visit the company.
Address: Tianhui Road, Wisdom City, Tianhe District, Guangzhou
Tel: 86-20-37896688
Fax:86-20-37896699
Mobile phone: 86-13711272581,Miss Liu
Web site:
