Product characteristics of [AC capacitor noise test system]
1. To provide users with measurement and recording of harmonic isoelectric parameters under AC test voltage of capacitor;
2. Sinusoidal AC power supply with voltage regulator and transformer boost has the characteristics of high stability and low noise;
3. The output of the equipment is standard AC voltage;
4. Control by Panasonic PLC (FP-X C14R);
5. Through Taiwan Willentong 7 color touch screen display and set a variety of parameters;
6. Protection module has the characteristics of fast, accurate and so on;
7. Use AC 220V/50Hz single-phase power supply.
Introduction to [AC capacitor noise test system]
6212T capacitor AC noise testing system is a special equipment for measuring and recording the harmonic and other electrical parameters of capacitor AC test voltage, and the noise system is integrated by the user. The Panasonic PLC Programmable Logic Controller (FP-X C14R) is selected to control, process data and automatically detect the working state of the output. The output of the device is standard AC voltage without harmonic input. In harmonic measurement, as long as the harmonic instrument power supply is turned on, the harmonic output can be directly observed on the harmonic display screen and on the touch screen of the cabinet as long as the harmonic instrument power supply is turned on, and the harmonic output can be observed quickly in the test. All the parameters and the working status of the instrument are displayed and set on the MT607iE 7 color touch screen of Taiwan, all kinds of parameters are off the power memory, the operation interface is humanized, and the operation is simple; And support U-disk copy test data and other functions. This equipment has the advantages of simple operation, good performance and high reliability.
Technical parameters of [AC capacitor noise test system]
(non-standard customizable)
Input characteristics:
1. Input voltage: AC 220V ±10%;
2. Input frequency: 50 Hz / 60 Hz;
3. Working environment: temperature: 10 ℃ ~ 30 ℃, humidity: ≤ 75% RH;
4. Power supply safe: 10A;
5. Device height: about 160 cm;
6. Color: Huawei grey.
Technical indicators:
1. Input power: 220VAC, 50Hz 2Hz;
2. Output voltage: 0HZ 1000VAC, 50Hz 2Hz; output voltage terminal located on the back of cabinet;
3. Output current: 0 / 12 A;
4. The meter shows current accuracy: 1.5%, resolution 1V;
5. Maximum load capacity: 35F;
6. Timer: 0, 999S, can be set to reach the preset time to stop the test automatically; 7. There are "Test" and "stop" buttons, manual pressure regulation.
Maintenance and regular maintenance of [AC capacitor noise Test system]
Maintenance:
In order to prevent electrical shock, please do not lift the lid of the instrument. All parts in this instrument need not be maintained by the user. If the instrument is abnormal, please seek maintenance from our laboratory. The attached circuit and block diagram are for reference only.
Regular maintenance:
The AC power supply, input power cord accessories and so on must be carefully checked and checked at least once a year to protect the safety of the user and the accuracy of the instrument.
..
For more information about products, please contact us and visit the company.
Address: Tianhui Road, Wisdom City, Tianhe District, Guangzhou
Tel: 86-20-37896688
Fax:86-20-37896699
Mobile phone: 86-13711272581,Miss Liu
Web site: