Product Name: TT-ST300-I Hand-push Cold Plastic Road Marking Machine:

Detailed Description of TT-ST300-I Hand-push Cold Plastic Road Marking Machine:

1.  Engine of TT-ST300-I Hand-push Cold Plastic Road Marking Machine: Japanese Robin5.0HP  or Honda 5.5HP deceleration gasoline engine.
2.  Paint pump of TT-ST300-I Hand-push Cold Plastic Road Marking Machine: The new type diaphragm high pressure air-free pump has big flow and stable pressure, whose max pressure is 25mpa (work pressure is 10-15mpa ) max flow: 8.5L/min.
3. Spray gun: The single  new type hand spray gun owns hard side columnar reverse wastewater nozzle (20/25), which makes  the site discharge very convenient and fast; the non-arc nozzle ensures the base line collimated. The  6m lengthening pipe which can be used for normal spray, such as spray arrow-head, character and so on.
4.  Spray width: 100-200mm.
5.  Chassis: Firm welding frame, whose surface has been chrome-plated, galvanizated or sprayed coating with anticorrosion treatment, equips with high speed type imported bearing to ensure the whole machine more lightsome and convenient. The hand brake device provides convenience for stopping on the slope.
6. Rubber wheel: The left, right back wheels are gas-filled pressure resistant vacuum wheels,  whose diameters are 440mm; the front direction wheels are the special naturally modified rubber wheels with abrasion resistance, whose diameters are 190mm.
7.  Front wheel guide rod: The direction locking device controlled by the brake handle ensures road-marking machine  freely operated in straight or twist
8. Guide rod: Freely adjust up, down, left, right.
9. Coating pot: Use coating tank (option for special paint tank to improve the work efficiency). There is an in-take sieve in the feed port.
10. Shape size .The whole machine weight: 1360mm (length )  ×900mm (width ) ×1050mm (height ).135kg .