Product Name: TT-ST100-IB Hand-push Cold Plastic Road Marking Machine:

Detailed Description of TT-ST100-IB Hand-push Cold Plastic Road Marking Machin:

1. Engine of TT-ST100-IB Hand-push Cold Plastic Road Marking Machin: Japan Robin 6.0ps or Honda 6.5hp four-stroke air-cooled gasoline engine.
2. Micro-computer control system (optional): It is consisted of micro-electronic controller, on-off coder, electro-magnetically operated valve, special gun bucket, pneumatic spray gun. The system can sets four different marking methods according
to the national marking standards and carries out fully automatic control. If not choose this system, equip with brake-controlled spray gun controller which can freely change the single or the double gun.
3. Chassis of TT-ST100-IB Hand-push Cold Plastic Road Marking Machin: Firm welding frame, whose surface has been chrome-plated or sprayed anti-corrosion coating, equip with the high speed imported bearing which ensures the whole machine more lightsome and more convenient.
4. Rubber wheel of TT-ST100-IB Hand-push Cold Plastic Road Marking Machin: the left, right wheels are gas-filled pressure resistant vacuum wheels, whose diameter are 440mm,the back stern wheels are the special naturally
modified rubber wheels with abrasion resistance, whose diameter is 190mm.
5. Front wheel guide arm: Locks the direction device on the front wheel which can ensure the road marking machine freely operation in straight or twist.
6. the guide rod: freely adjust up, down, left, right. 7. light and alarming function(optional): the prepared high intensity illuminating lamps convenience for the construction at night. The flash lights which can freely adjust the flicker frequency largely improve the safety in construction.
8. Paint pump of TT-ST100-IB Hand-push Cold Plastic Road Marking Machin: the new type diaphragm high pressure air-free pump has big flow and stable pressure, whose max pressure is 25 Mpa (working pressure is 10-15 Mpa)
max flow: 8.5 L/min.
9. Paint tank: the cubage is 65L. there is a sieve in the tank, and sieve in the feeding port.
10. Spray gun: the double new type hand spray guns own hard side columnar reverse wastewater nozzle (17/25), which makes the site discharge very convenient and fast,the
non-arc nozzle ensures the base line collimated. The 6 m lengthening pipe which is installed with the machine can be used for normal spray, such as spray the arrow-head, character and so on.
11. Spray width: 100-450mm. 12. Manostat: special structure design, stainless steel material, ensures the stable pressure, and suit for the water based paint construction.
13.Can chose TT-ZT-II self-propelled device, realize self-propelled function, which greatly reduces the intensity of labor and improves the efficiency.
14. Quickly makes firm pressure vapor pressure type big capacity container, with a window, which can extend the glass bead time and know the glass bead inventory in the tank timely. The tank capacity: 25Kg.
15. Glass bead dispense system: the pressure jet type glass bead dispense system, can dispense the glass bead on the marking surface at the same time of spraying the paint, which can improve the glass bead adhesion, and realize the reflecting
effects of marking. The dispense width can be adjusted according to the needs.
16. Air pressure system: the ram type compressor can ensure the pneumatically actuated spray gun, the glass bead tank, the paint tank and the glass bead spray gun can work better under the pressure.
17. Shape size, the whole machine weight: 1350mm(length)1180mm(width)1050mm(height). 264kg.