Outline

It is two-component epoxy   adhesive. It is easy and convenient to use for it cures at room temperature   within the given time. No bubbles appear after curing thus making the surface   smooth and bright. Its liquidity, color and heat-resistance quality are   adjustable

Applications

It applies to the potting of   transformers, electronic components, chips and coils to protect them against   moisture, chemicals, excessive heat, vibration, mechanical impact and thermal   shocks.

Features

Component A is pasty, non-solid   particle. component B is colorless liquid.

Fast curing velocity. At 25 °C, within 1-3 hours, its surface   cures, 18 hours later, it reaches its maximum bonding strength.

Being durable and resistant to   ultraviolet light, it is used in such tough weather conditions as desert，Arctic regions.

Being heat-resistant, it adapts   to a wide range of temperature and bonds well under high temperature.

Mix the two components in a   certain proportion, apply it to the surface of the substrates directly, which   makes it so convenient to use.

You.ll get long term durability   and resistance to moisture, chemicals, oils, and temperature extremes.

The cured resin reach the RoHS.  

Being stable, its shelf life is   one and a half year.

The main technical parameters   are as follows:

Heat resistance scope：- 60 °C—+ 205    °C

volume resistance:   1×1015Ω.cm      sheet resistance     2.5×1015Ω

voltage withstand  30-35kV/mm        hardness  shore D50-65

Water absorbing capacity 24h＜0.1%  Tg:120℃   contraction coefficient 0.8

Tensile strength≥45MPa;   Shearing strength≥28 Mpa   compressive strength: 85Mpa   120℃  tensile strength:3.8-4.5Mpa

Instruction

1. Clean the surface of the   material such as coil, frame, make sure they have no dust or oil on them.

2. Mix A and B in a proportion   of 3:1 well,  and pot it evenly into   the frame.

3.

3. Spread the mixture on the   substrates, put them together and apply some strength on them, finally, let   them dry for 2-4 hours

Notes

1. The tools used to get   adhesives should be different.

2. It is necessary to keep it   well ventilated and away from fire.

3. If it has contact with skin,   you should wash with soap.

4. It can be stored at   well-ventilated places with low temperature, and keep them away from fire.   Cover the lip after using it.