Outline

It is   heterocyclic adhesive which cures fast when heated. it is temperature   resistant and easy to operate. No bubbles appear after curing thus making the   surface smooth and bright. Its viscosity and heat resistant property is   adjustable.

Applications

         It applies to the coating, infiltrating and encapsulating of device surface,   electronic components and chips in electric engine, capacitor, thermocouples,   transformers, rectifiers, electronic modules LSI and other products to   protect them against moisture, chemicals, excessive heat, vibration,   mechanical impact and thermal shocks. It also applies to the bonding of   metals, alloy, ceramics, glass and transparent compound which work under   water or in some humid environment.

Features

It is   one-component transparent thick liquid.

It cures within   one minute when heated with the temperature 120°C for one minute.

It is resistant   to shock, ultraviolet light and extreme weather once it cures because it is   durable and with good ductility and low contraction coefficient.

Being   heat-resistant, it adapts to a wide range of temperature and bonds well under   high temperature.

Being moderate in   viscosity, the surface appears smooth and bright after curing.

Apply the   adhesive to the surface of the substrates directly or fill it into the gap,   then heat it...

You.ll get long   term durability and resistance to moisture, chemicals, oils, and temperature   extremes.

Being stable, its   storage time is one year.

The main   technical parameters are as follows:

Heat resistance   scope：- 52 °C—+ 325 °C   

volume   resistance: 1.7×1015Ω.cm    sheet resistance     2.5×1015Ω

voltage   withstand  28-35.5kV/mm     hardness  shore D85

dielectric   coefficient:4.4  Tensile strength≥35MPa;   bending strength≥65 Mpa  compressive strength≥175MPa     shearing strength≥28.8Mpa   shock strength≥17KJ/m*m

Instruction

1.To get the best   results, the two surfaces being bonded should be free of oils, dirt, moisture   and other contaminants and should be slightly roughed or sanded to remove   gloss.

2. Spray the   adhesive on the substrates, put them together and apply some strength on   them, heat it with 120°C, wait for one minute and let it dry

Notes

1. Better to keep   the working place well ventilated.

2 .If it has   contact with skin, you should wash with soap.

3. It can be   stored at well-ventilated places with low temperature, and keep them away   from fire. Cover the lip after using it.