1oz Blind Via 4 Layer Circuit Board Immersion Gold Tg 170 PCB For Converter
 
PCB Data sheets

 
 
Advantages
1) ITEQ FR-4 Tg135, RoHS compliant and suitable for thermal reliability needs,and Lead free assemblies with a maximum reflow temperature of 260℃.
2) No MOQ, low cost for small quantity prototypes and samples.
3) Blind via design
4) Devlivery on time: >98%
 
 
More Applications in Electronics
Access Control Definition
Industrial Systems
3G Wireless
Ac-Dc Power Supplies
3G Routers
Wireless 3G Router
 
 
PCB knowledge: PCB classification
Classification by layers: It's divided into a single sided PCB, double sided PCB and multilayer PCB. The Common multilayer board is generally 4 layers or 6 layers, complex multilayer board up to dozens of layers.
 
Single Sided PCB
Single Sided Boards are the most basic parts of PCB. Components are concentrated on one side, the wire track is focused on the other side (SMD components and wires for the same side, then the other side of the through-hole components). Because the wire appears only in one side, so this kind of PCB is called single sided.
It has many strict restrictions in the design on the line (because of only one side, each wire must not cross and goes around its own path), so this type of circuit board is used at the early stage of circuit.

Double sided PCB
Both sides of the circuit board are wired, but to use the two sides of the wire, we must have the proper circuit connection between the two sides. The "bridge" between the circuits is called the pilot hole (via). The via is filled with or coated with a small hole in the PCB. It can be connected to the two sides of the wire. Because double sided PCB is twice larger in area than a single sided PCB, it solves the difficulty that wiring staggered in single side PCB (through hole conduction to the other side). It is more suitable for use in circuits that are more complex than a single sided board.

Multilayer PCB
In order to increase the area that can be wired, multilayer board