Main Products: 
Non Freon Styrofoam Sheet XPS Extrusion Line , Single Screw CO2 XPS Extruder
USD $300 - $300 /Square Meter
Min.Order:1 Square Meter
Quick Details View All >
CO2 + LPG / Isobutane XPS Production Line for Freon free Styrofoam Sheet
CFC / HCFC / HFC free XPS Production Line With Low Energy Consumption
High Torque Twin Screw XPS Extrusion Line , XPS Extruder 75T/200 for Styrofoam Insulation Board
Single Screw XPS Production Line 135 / 150 For Extruded Polystyrene Insulation Board
High Performance Insulation Board XPS Production Line 75T / 150 Twin Screw
High Capacity Freon Free XPS Production Line 75T / 200 For Polyurethane Foam Sheets
Product Details
Nanjing Ourgreen CO2 XPS Extruder, XPS Extrusion Line, XPS Machine for Non Freon Styrofoam Sheet Manufacturing
Phase-out of Freon as Blowing Agent in CO2 XPS Board Manufacturing
XPS Board, at its early stage, is produced with Blowing Agents of HCFC, a kind of Freon. Freon
technology is easily accessible for many manufacturers. However, as Freon damages Ozone Layer,
it is generally recognized that Freon must be phased out world wide, which is plan of UNIDO.
Ourgreen applies CO2 as well as other non freon gases in XPS production, making final XPS Foam
Board totally eco friendly. We are contributing to environment protection by replacing Freon. Together
we build our green world!
The CO2 is usually mixed with other Non Freon gases like LPG, Butane, DME, Ethanol for better
expanding. XPS Foam Board of CO2 technology is durable, stronger, and eco-friendly.
Ourgreen CO2 XPS Production Line Specification
The CO2 XPS Production Line includes basic configuration of XPS line as well as CO2 Injecting System.
It is generally known that the boiling point of CO2 is - 78.4℃ while all Blowing Agent must be kept in
liquid state before being injected to extruder. In order to maintain the liquid state, we have to decrease
temperature and increase pressure for CO2 largely. Here you can imagine why the inside pressure for
CO2 XPS Line is much higher than that of Freon XPS Line. Ourgreen CO2 XPS Line is designed to
bear high pressure to ensure smooth manufacturing of XPS Board.
|
SN |
Items |
Quantity |
Function |
|
1 |
Simplified Double Stage Feeding System |
1 Set |
Mixing & Feeding |
|
2 |
1st Twin Screw Extruder 75T |
1 Set |
Melting Raw Materials |
|
3 |
CO2 + LPG Injecting System |
1 Set |
CO2 + Other Blowing Agents |
|
4 |
Hydraulic Screen Exchanger |
1 Set |
Change Screen Instantly |
|
5 |
2nd Single Screw Extruder 150 |
1 Set |
Cooling Raw Materials |
|
6 |
Static Mixer |
1 Set |
Mixing Raw Materials . |
|
7 |
Mould 300MM(Slot Die) |
1 Set |
Extruding Materials Out |
|
8 |
Calibrator |
1 Set |
Shaping XPS Board |
|
9 |
1st Haul-off Unit |
1 Set |
Haul-off |
|
10 |
Cooling Racks |
4 Sets |
Cooling XPS Board Naturally |
|
11 |
Width Cutting System |
1 Set |
Cutting 600MM Width |
|
12 |
2nd Haul-off System |
1 Set |
Haul-off |
|
13 |
Length Cutting System |
1 Set |
Cutting length |
|
14 |
Recycling Machine |
1 Set |
Recycling XPS to Granules |
Ourgreen CO2 XPS Production Line Advantages:
1. Simplified Double Stage Feeding System saves labors;
2. Twin Screw better mixes all Blowing Agents and raw materials;
2. Stable Continuous Running Condition;
3. Low Energy Consumption;
4. Advanced Blowing Agent Technology;
5. Low Failure Rate;
6. Easy Maintenance.
Ourgreen Economic XPS Production Line Models:
Facebook
X
Pinterest
Linkedln