High Capacity Freon Free XPS Production Line 75T / 200 For Polyurethane Foam Sheets
USD $300 - $300 /Piece
Min.Order:1 Piece
High Capacity Automatic XPS Production Line 95T / 300 for Styrofoam Insulation Board
ISO, CE XPS Production Line OGSS 135 / 150 for Low Density XPS Board
Economic Extruded Styrofoam Sheets XPS Foam Board Production Line
CE CO2 XPS Production Line OGSS 150 / 200 for Extruded Styrofoam Sheets
CFC / HCFC / HFC Free XPS Extruder Equipment , Extruded Styrofoam Sheets Machine
Styrofoam Insulation Board CO2 XPS Extrusion Line 5T/150 Low Failure Rate
Nanjing Ourgreen High Capacity, Freon Free XPS Production Line 75T / 200 for XPS Insulation Board
Nanjing Ourgreen Introduction
Nanjing Ourgreen adopts CO2 technology, using GPPS (General Purpose Polystyrene), other Blowing
Agent like Butane/LPG/DME, Nucleating Agent and high performance Fire Retardants as the raw materials
to mass produce the nearly 100% closed-cell XPS Foam Board.
Apart from XPS Foam production, we are also manufacturing Polystyrene Extrusion Line,and we are
continuously putting pragmatic production experiences into machine building technology. With several
Patents at hand, we are able to offer you one-stop XPS plant building services.
Global HCFCs Substitution Situation
European Union banned HCFCs in 2002 and HFCs were banned in 2013 too. The European Union tends
to use CO2 System, namely CO2 + Alcohols + Aliphatic Hydrocarbons.
Japan forbid use of HCFC in XPS production in 2004 and now they are using Isobutane as Blowing Agent.
With aid of Water and some other assistant Blowing Agent, the final XPS bears special structure, which
decreases Thermal Conductivity and improves fire behavior.
North America uses HFC blends as the Blowing Agent and one other manufacturer uses CO2 + Aliphatic +
Water.
Below is the full configuration of a complete XPS Production Line:
SN |
Items |
Quantity |
Function |
1 |
Sprial Feeding System |
1 Set |
Mixing & Feeding |
2 |
1st Twin Screw Extruder 75T |
1 Set |
Melting Raw Materials |
3 |
CO2 + Isobutane Injecting System |
1 Set |
CO2 + Other Blowing Agents |
4 |
Hydraulic Screen Exchanger |
1 Set |
Change Screen Instantly |
5 |
2nd Single Screw Extruder 200 |
1 Set |
Cooling Raw Materials |
6 |
Static Mixer |
1 Set |
Mixing Raw Materials . |
7 |
Mould 300MM(Slot Die) |
1 Set |
Extruding Materials Out |
8 |
Calibrator |
1 Set |
Shaping XPS Board |
9 |
1st Haul-off Unit |
1 Set |
Haul-off |
10 |
Cooling Racks |
4 Sets |
Cooling XPS Board Naturally |
11 |
Width Cutting System |
1 Set |
Cutting 600MM Width |
12 |
2nd Haul-off System |
1 Set |
Haul-off |
13 |
Length Cutting System |
1 Set |
Cutting length |
14 |
Recycling Machine |
1 Set |
Recycling XPS to Granules |
Nanjing Ourgreen High Capacity, Freon Free XPS Production Line 75T / 200 Advantages:
1. Low ODP, low GWP;
2. Low Production Cost;
3. Environtmental friendly XPS product;
4. Simplified Double Stage Feeding System saves labors;
5. Twin Screw better mixes all Blowing Agents and raw materials;
6. Stable Continuous Running Condition;
7. Low Energy Consumption;
8. Advanced Blowing Agent Technology;
9. Low Failure Rate;
10. Easy Maintenance.
Nanjing Ourgreen High Capacity, Freon Free XPS Production Line Models: