Delivery Time:Approx. 30 days depends on quantity
Certification:CE/ISO 9001:2000

380V Hydraulic Power Unit Lift Table Power Units with oil tank

General Description


　　This power unit is designed exclusively for small and medium lift table, which consists of high pressure gear pump, AC motor, multi-functional manifold, valves, tank, etc. The lowering movement is activated by the solenoid valve with the speed controlled by the balance valve.

Model	Motor Volt	Motor power	Rated Speed	Displacement	System pressure	Tank Capacity	L(mm)
YBZ-F1.6B3G2/LCABD1	220VAC	1.5KW	2800 RPM	1.6mL/r	20MPa	6L	629
YBZ-E2.1B3G2/LCAED1	2.1mL/r	16MPa	6L	629
YBZ-D2.5C3G2/LCAED1	2.5mL/r	12MPa	8L	699
YBZ-F2.1C4H2/LCAED1	380VAC	2.2KW	2.1mL/r	20MPa	8L
YBZ-E2.5D4H2/LCABD1	2.5mL/r	16MPa	10L	769
YBZ-E2.7E4H2/LCAED1	2.7mL/r	15MPa	12L	869

Remark: 1. Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
　　　　2. Clean all the hydraulic parts concerned before mounting the power unit.
　　　　3. 60HZ motors with CSA or UL certification are available upon request.

Special notes


　　1. The power unit is of S3 duty, which can only be worked intermittently, ie., 1minute on and 9 minutes off.
　　2. Clean all the hydraulic parts concerned before mounting the power unit.
　　3. Viscosity of the hydraulic oil shoud be 15~68 cst, which should also be clean and free of impurities. N46 hydraulic oil is recommended. 　　
　　4. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
　　5. The power unit should be mounted horizontally.