Delivery Time:Approx. 30 days depends on quantity
Certification:CE/ISO 9001:2000

Power Units For Double-scissors Lift 2

General Description


　　Equipped with the zero leakage double-check solenoid valves, this power unit fulfils the complete separation of the two independent circuits, which are respectively for the main platform and subordinate platform of the double scissors lift. By increasing the number of the solenoid valves, it is easy to get more independent circuits, which are used to control the corresponding cylinders.

Model	Motor Volt	Motor power	Rated Speed	Displacement	System pressure	Tank Capacity
YBZ5-F2.7C3G30/LBCEN1	220VAC	1.5KW	1400rpm	2.7mL/r	22MPa	8L
JLZ5-F3.2E3G30/LBCEN1	3.2mL/r	20MPa	12L
JLZ5-F2.5F3H30/BCCEN1	2.2KW	2800rpm	2.5mL/r	18MPa	14L
JLZ5-E3.2G3H30/LCCEN1	3. 2 mL/r	15MPa	16L
JLZ5-D4.2G3H30/LCCEN1	4. 2 mL/r	10MPa	16L
JLZ5-F2.7H4I30/BCCEN1	380VAC	3KW	2.7mL/r	20MPa	20L
JLZ5-F3.2I4I30/LCCEN1	3.2mL/r	18MPa	22L
JLZ5-E3.7J4I30/LCCEN1	3.7mL/r	16MPa	25L

Remark: 1. Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
　　　　2. 60HZ motors with CSA or UL certification are available upon request. 
 

Special notes

　

1. The duty of this power unit is S3, i.e., 30 seconds on and 270 seconds off.

2. Clean all the hydraulic parts concerned before mounting the power unit.

3. Viscosity of the hydraulic oil should be 15~68 cst, which should also be clean and free of impurities, N46 hydraulic oil is recommended.   

4. This power unit should be mounted vertically.

5. Check the oil level in the tank after the initial running of the power unit.

6. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.