Delivery Time:Approx. 30 days depends on quantity
Certification:CE/ISO 9001:2000

Fork Lift Power Units 

General Description


　　Equiped with a high pressure gear pump, a DC motor, a multi-functional manifold, valves and a tank, ect. This power unit features power up gravity down actions. Start the motor to lift the machine and the lowering movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve.The products are widely used in the industry of logistic devices such as fork lift, mini lift table etc.

Model	Motor Volt	Motor power	Rated Speed	Displacement	System pressure	Tank Capacity
JLZ5-F1.2B1W2/WUDAN1	12VDC	1.5KW	2500rpm	1.2mL/r	20MPa	6L
JLZ5-F1.6B1W2/WUDAN1	1.6mL/r
JLZ5-F2.7B2A2/WUDBN1	24VDC	2.2KW	2.7mL/r
JLZ5-F2.5B2A2/WUDBN1	2.5mL/r

Remark: 1. Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
　　　　2. The manual override function is available on request. 
 

Special notes


　　1. The duty of this power unit is S3, i.e., 30 seconds on and 270 seconds off.
　　2. Clean all the hydraulic parts concerned before mounting the power unit.
　　3. Viscosity of the hydraulic oil shoud be 15~68 cst,which should also be clean and free of impurities.N46 hydraulic oil is
　　　recommended. 　　
　　4. Check the oil level in the tank after the initial operation of the power unit.
　　5. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.