EP Conveyor Belt
USD $1 - $50 /Meter
Min.Order:50 Meters
Zhenjiang New Hengtong Conveying Equipment Co., Ltd.
1. Use: It is suitable for conveying materials at medium or long distance and under conditions of heavy load and high speed.
2. Varieties: In accordance with the characteristics of the covered rubber.there are belts of general,heat resistance, fire resistance, cold resistance, acid-basic resistance,and oil resistance.
3. Characteristics:
(1)Under standard load condition ,the spreading atio is small,The spreading is small in use.
(2)The flexure is good .As a result a trough can be easily made.
(3) It resists impact and wear.
(4)The water resistance is good .When damp or in water,it can be used without any decrease of the strength.
(5)As the mode number of EP is greater ,if a design for conveyer belt is made, lower safety efficient can be adopted.
(6)Resistance to heat is stronger.
(7)No corrosion of mould will occur.
(8)It is in line with the National Standard GB7984-87.
4.Specifications:
(1)Types:EP-150 EP-200 EP-250 EP-300 EP-400
(2)Width:300to2000mm
(3)Layers of fabric: 2to6
(4)Thickness of the covered rubber: Upper:3.0 4.5 6.0mm Lower:1.5 3.0 4.5mm
(5)Length of each roll:100m.
Technical Index
Material | Layer | Width | Length | Model | Cover Thickness | |
top (mm) | bottom (mm) | |||||
Polyester carcass | 2-6 | 300-2000 | According to Customer's Demand | EP150~400 | 3.0 4.5 6.0 | 1.5 3.0 4.5 |
Physical and Mechnical Performance (GB-7984-87)
cover | Performance | Unit | Polyester | |
Tensile strength | MPa≥ | 18 | ||
Elongation at break | %≥ | 400 | ||
Hardness | Degree (shore) | 55-65 | ||
Abrasion loss | CM3/1.61Km≤ | 0.7 | ||
Elasticity | %≥ | 32 | ||
Cover and carcass | Adhesion between covers and carcass | Covers more than 1.5mm thick | N/mm≥ | 3.5 |
covers less than 1.5mm thick | N/mm≥ | 3.15 | ||
Adhesion between adjacent piles | N/mm≥ | 4.5 | ||
Flex between piles | Time/Full Peel | - | ||
Radial tensile force per ply | N/mm≥ | As per type | ||
Elongation at break | %≤ | 25 |