Specifications

It is suitable for conveying materials at medium or long distance and under conditions of heavy load and high speed.

1. Use: It is suitable for conveying materials at medium or long distance and under conditions of heavy load and high speed.
2. Varieties: In accordance with the characteristics of the covered rubber.there are belts of general,heat resistance, fire resistance, cold resistance, acid-basic resistance,and oil resistance.
3. Characteristics:

(1)Under standard load condition ,the spreading atio is small,The spreading is small in use.

(2)The flexure is good .As a result a trough can be easily made.

(3) It resists impact and wear.

(4)The water resistance is good .When damp or in water,it can be used without any decrease of the strength.

(5)As the mode number of EP is greater ,if a design for conveyer belt is made, lower safety efficient can be adopted.

(6)Resistance to heat is stronger.

(7)No corrosion of mould will occur.

(8)It is in line with the National Standard GB7984-87.

4.Specifications:

(1)Types:EP-100 EP-150 EP-200 EP-250 EP-300 EP-400

(2)Width:300to2000mm

(3)Layers of fabric: 2to6

(4)Thickness of the covered rubber: Upper:3.0 4.5 6.0mm Lower:1.5 3.0 4.5mm

(5)Length of each roll:100m.

 

 

Technical Index

Material	Layer number	Width  (mm)	Length (mm)	Model  number	Cover Thickness
					top (mm)	bottom (mm)
Polyester carcass	2-6	300-2000	According to Customer's Demand	EP150~400	3.0 4.5 6.0 mm	1.5 3.0 4.5 mm

 

Physical and Mechnical Performance (GB-7984-87)

 

cover	Performance		Unit	Polyester carcass
	Tensile strength		MPa≥	18
	Elongation at break		%≥	400
	Hardness		Degree (shore)	55-65
	Abrasion loss		CM3/1.61Km≤	0.7
	Elasticity		%≥	32
Cover and carcass	Adhesion between covers and carcass	Covers more than 1.5mm thick	N/mm≥	3.5
		covers less than 1.5mm thick	N/mm≥	3.15
	Adhesion between adjacent piles		N/mm≥	4.5
	Flex between piles		Time/Full Peel ≥	-
	Radial tensile force per ply		N/mm≥	As per type
	Elongation at break		%≤	25